Instrukcja obsługi Pyle PDA30BU
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PDA30BU (6 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 13.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/6
Wireless Stereo Power Amplifier BT Compatible
PDA30BU
Blue Series Compact and Audio Streaming Amp
with RCA & Speaker Terminals
www.PyleUSA.com
2
Read through this user manual before using the product
to ensure its correct use. Keep this manual for future reference.
Quick Setup:
1. Main Power ON Switch: Switch ON/OFF the amplier by using this switch.
2. --LINE input model --Wireless BT input model.Input LED: RED Green
3. MIC Input
4. Mic volume control: Use this control to set the volume level of Microphone.
5. Adjust to boost or cut LOW frequencies.BASS KNOB:
6. Adjust to boost or cut HIGH frequencies.TREBLE KNOB:
7. Master Volume: Adjusts main audio system volume level.
8. Lets you connect the desired LINE input source.RCA L/R LINE Input:
9. Speaker output (L/R)
10. AC IN
11. Wireless BT Antenna: Wireless BT Streaming receiver
Rear PanelFront Panel
www.PyleUSA.com
3
Setup and pairing (Wireless BT ampliers) are really easy. The following
instructions will help you connect Audio Ampliers to your music system or
pair with your tablet, computer, or smartphone.
1. Connecting the Speaker Wire
Audio stereo power ampliers that will power one pair of passive speakers
between 4 and 8 ohms (or subwoofer if you got the 2.1 CH amp or subwoofer
amp). To connect the amplier to your speakers you will need 2-conductor
stranded speaker wire. The ampliers use high-quality binding posts that will
accept heavy gauge bare wire banana plugs, spade lugs, or pin terminators.
If you use your own speaker wire we recommend using at least 16 gauge wire
and using the same length of wire from the amplier to each speaker It's also a
good idea to turn o your amplier before connecting power, audio sources or
speakers.
Preparing the Speaker Wire
1. Separate the last 3" of each speaker wire conductor.
2. Strip 1/2" of insulation from the end of each wire.
3. Twist the exposed copper strands with your ngers 3 or 4 times so the strands
stay together.
NOTE:
As you make your connections, be sure to connect the positive (+) terminals on
your amplier to the positive (+) terminals on your speakers. Even if your wire does
not have (+) or (-) markings, most 2-conductor speaker wire has printing on one
side to help you dierentiate between the wire pairs.
If you are Using Bare Wire
1. Use your thumb and nger to unscrew the binding post connectors on the back
of each speaker.
2. Insert each speaker wire into the holes on the side of the binding post connectors,
observing proper polarity.
3. Retighten the binding posts with your ngers.
4. The stripped portion of the wire should be secured rmly in each connector.
5. Make sure that none of the speaker wire strands have come in contact with an
adjoining terminal.
Specyfikacje produktu
| Marka: | Pyle |
| Kategoria: | odbiornik |
| Model: | PDA30BU |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pyle PDA30BU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Pyle
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
8 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
30 Września 2024
29 Września 2024
Instrukcje odbiornik
- odbiornik Synq
- odbiornik Neets
- odbiornik C2G
- odbiornik Proel
- odbiornik HQ Power
- odbiornik Datapath
- odbiornik VMV
- odbiornik Motorola
- odbiornik Lumantek
- odbiornik JETI
- odbiornik Brigmton
- odbiornik Telefunken
- odbiornik Mooer
- odbiornik Warm Audio
- odbiornik Bellari
Najnowsze instrukcje dla odbiornik
9 Kwietnia 2025
9 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025