Instrukcja obsługi Pyle PDWM8300
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PDWM8300 (10 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.7 gwiazdek
Strona 1/10
8-Ch. Conference Wireless Microphone System
PDWM8300
with (8) Tabletop Goosenecks Mics
www PyleUSA com
2
www PyleUSA com
3
FOREWORD
Please read this manual thoroughly before you attempt to set up and use the
Wireless Microphone System. It contains a range of installation suggestions as
well as instructions to ensure safe usage. Installed properly, you can expect
years of trouble-free service from this product.
Main Features
1. Using VHF 170-215.8 VHF band to avert interferencing frequency.
2. Using multi level high frequency and mid frequency narrow band lter, so as
to dispel any possible interferencing signals.
3. A specially designed circuit switch is on the phone. It is for clearing up waves
of miscellaneous signals
4. All use quartz crystal oscillating circuits, so the frequency is very steady.
5. With audio compressing-expanding technology, the machine can lower
noises and increase the dynamic range. It can also lower reecho.
6. It has separate channel and mix output, and it can be connected with the
sound-adjusting stage and the karaoke enlarge.
7. Special key tone locked identity functions to avoid interference signal
from outside. Opens the mute system.
8. There are multiple noise detect multi-circuits. With strong anti-jamming
function.
9. Uniform cardioid pickup pattern isolates the main sound source and minimizes
background noise
10. Eective, built-in spherical wind and pop lter.
11. Longest distance in open:100m. Idealest distance in open: 50m
Cautions
1. Please ensure to place the host receiver in a place where it has good condition
for signal, without dead angle.
2. Please keep the microphone transmitter from throwing, casting, and so on.
Care should be taken to protect against breaking.
3. Non-waterproof. Protect the receiver from rain or water to prevent a short
circuit.
4. Please keep distance with or away electromagnetic eld, high voltage
power net or big metal subjects.
5. Please switch the transmitter when you change the battery.OFF
6. Please put out the battery if you will not use the microphone for a long time.
7. Please plug out the reciever if you will not use the microphone for a long time.
8. If any part of the product is damaged, please contact your dealer/distributor
or nearest service center
9. This warranty does not cover service or parts to repair damage caused by
accident, neglect, abuse, normal & wear, disaster, misuse, abuse, overpowering,
negligence, inadequate packing or shipping procedures and service, repair or
any modications to the product which have not been authorized or
approved by PyleUSA.
TECHNICAL PARAMETERS
Unit Specication
Frequency range
Frequency stability
Modulation
Frequency response
T.H.D
Distance
Temperture
Reciever
Receiving system
Sensitivity
Removing weight
Audio output
Output connection
Power supply
170-215.8MHz VHF band
±0.005%
FM
40Hz-18KHz (3dB)
-0.8%
50-100M
14-131°F (-10-55°C)
Quartz crystal frequency
10UV/40DB emf
50ms
0-0.35Vp-p 5k
6.3 mm plug
DC:12-17 V
Specyfikacje produktu
| Marka: | Pyle |
| Kategoria: | mikrofon |
| Model: | PDWM8300 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pyle PDWM8300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Pyle
28 Stycznia 2025
27 Stycznia 2025
15 Stycznia 2025
30 Grudnia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
13 Października 2024
7 Października 2024
6 Października 2024
Instrukcje mikrofon
- mikrofon Townsend Labs
- mikrofon Bose
- mikrofon Neumann
- mikrofon Gembird
- mikrofon Steelseries
- mikrofon DOCKIN
- mikrofon Proel
- mikrofon Sennheiser
- mikrofon Sandberg
- mikrofon Vimar
- mikrofon Techly
- mikrofon Konig
- mikrofon Ambient Recording
- mikrofon Hama
- mikrofon ANT
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025