Instrukcja obsługi QSC K8.2

QSC głośnik K8.2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC K8.2 (23 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/23

K.2 S er ie s

K.2 S er ie sK.2 S er ie s

K.2 Series

User Manual

K8.2 – 105° 2000 W active 8” (200 mm) 2-way loudspeaker system

K10.2 – 90° 2000 W active 10” (250 mm) 2-way loudspeaker system

K12.2 – 75° 2000 W active 12” (300 mm) 2-way loudspeaker system

TD-000523-01-F

*TD-000523-01*

TD-000523-01-F

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may

be bodily injury or death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are

not followed, it may result in damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.

The term “NOTE” is used to indicate additional useful information.

NOTE: The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence

of un-insulated “dangerous” voltage within the product’s enclosure that may be of sufﬁcient magnitude to

constitute a risk of electric shock to humans.

NOTE: The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of

important safety, and operating and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE. DO NOT USE THIS APPARATUS NEAR WATER.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from theapparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

TD-000523-01-F

14. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable

after installation.

15. Adhere to all applicable, local codes.

16. To prevent electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.

17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a dry cloth.

19. Do not unplug the unit by pulling on the cord, use the plug.

20. Do not submerge the apparatus in water or liquids.

21. Keep ventilation opening free of dust or other matter.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

Maintenance and Repair

WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially

adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons

and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only

by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury,

harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.

Life Cycle: Storage Temperature range: Relative Humidity range: 10 years, -20C to +70C, 5 - 85% RH

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Specyfikacje produktu

Marka:	QSC
Kategoria:	głośnik
Model:	K8.2
Kolor produktu:	Czarny
Rodzaj zasilania:	Prąd przemienny
Materiał obudowy:	Kopolimer akrylonitrylo-butadieno-styrenowy (ABS)
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	449 mm
Szerokość produktu:	280 mm
Głębokość produktu:	269 mm
Waga produktu:	12200 g
Rekomendowane użycie:	Uniwersalne
Technologia łączności:	Przewodowa
Moc wyjściowa (RMS):	- W
Certyfikaty:	CE, WEEE, UL, China RoHS, RoHS II, FCC B
Typ ekranu:	1.75" LCD
Kanały wyjścia audio:	1.0 kan.
Waga wraz z opakowaniem:	14400 g
Diody LED:	Tak
Wyście mocy ac:	Tak
Klasa wzmacniacza:	D
Zasięg częstotliwości:	55 - 20000 Hz
Rozmieszczenie głośników:	Podłoga
Ilość przetworników:	2
Wzmacniacz:	Wbudowany
Ustawienia korektora:	Tak
Typ głośnika:	2-drożny
AirPlay:	Nie
Rekomendowana moc wzmacniacza (maks):	1800 W
Rekomendowana moc wzmacniacza (min):	225 W
Typ interfejsu głośnika:	XLR
Typ interfejsu wejściowego wzmacniacza/odbiornika:	3.5 mm jack, XLR
Tworzywo przetwornika piezoelektrycznego:	Tytan