Instrukcja obsługi QSC M10 Kit-C
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC M10 Kit-C (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/2
M10 Kit-C
User Manual
Contents
• M10, Steel Eyebolt – 3 each
• Conical Spring Washer – 3 each
• User Manual TD-000289-00
• Warranty Statement TD-000453-01.
IMPORTANT SAFETY INSTRUCTIONS
NOT: The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of
important safety, and operating and maintenance instructions in this manual.
Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, enclosures,
transducers, brackets and associated equipment for damage. Any missing, corroded, deformed, or non-load rated
component could significantly reduce the strength of the installation or placement. Any such condition severely reduces
the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading
conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the
hardware or equipment.
Consult a licensed, Professional Engineer regarding physical equipment installation. All local, state and national regulations regarding the
safety and operation of equipment are understood and adhered to.
• Use only load rated hardware to attach to the eyebolts when suspending these products.
• Do not suspend these products from any structural element on the enclosure other than the load rated M10 suspension points.
• Install in accordance with instructions by QSC, LLC instructions and under
the supervision of a licensed Professional Engineer.
Vertical Suspension of Composite Loudspeaker
Enclosures
Install Two Surface Eyebolts
Refer to — Figure 1
1. On the enclosure, locate the two adhesive plastic covers, protecting the
enclosure’s M10 threads, and remove them.
2. Place one conical spring washer onto the threaded portion of an eyebolt
and carefully thread the eyebolt assembly into the enclosure’s threads.
Repeat for the other M10 fitting.
3. Tighten each eyebolt until shoulder is snug against the spring washer and
the spring washer is snug against the enclosure. Tighten the eyebolts down
and then continue to rotate until they are positioned asdesired.
— Figure 1 —
Top eyebolt
installation
locations
for vertical
suspension.
®
TD-000289-01-D
*TD-000289-01*
Specyfikacje produktu
| Marka: | QSC |
| Kategoria: | głośnik |
| Model: | M10 Kit-C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z QSC M10 Kit-C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje głośnik QSC
29 Marca 2025
29 Marca 2025
29 Marca 2025
29 Marca 2025
29 Marca 2025
29 Marca 2025
22 Lutego 2025
22 Lutego 2025
31 Stycznia 2025
29 Stycznia 2025
Instrukcje głośnik
- Yamaha
- Lab 31
- Telestar
- Brandt
- Vtech
- Elipson
- Andover
- M-Audio
- Podspeakers
- Aurum
- Eikon
- Select Increments
- Polsen
- Avantree
- Titanwolf
Najnowsze instrukcje dla głośnik
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025