Instrukcja obsługi Sharp SKMD30F0AS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp SKMD30F0AS (4 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 4 użytkowników na średnio 4.5 gwiazdek

E 1

C

N

H

E

F

D

A

B

J

L

I

M

K

G

Note: the face of the shelf must

sit 1 3/ "4 (44.45 mm) back from

the face of the cabinet.

cabinet face

shelf faceO

24" Flush Mount DeFlector Vent: sKMD24F0As

INSTALLATION INSTRUCTIONS

1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.

CL

Top view

A

Anti-Tip block

Mounting cleat

BC

Drawer faceCabinet

face

Note: the mounting surface of the finished cleat must sit 1

1/" (26.97 mm)16 back

from the face of the cabinet [pushing the face of the drawer out 1/" (6.35 mm)4].

Figure 1

Figure 2A

Important notes to the Installer

 •Read all of the Installation Manual that is included with

the Microwave Drawer before installing in the ush mount

conguration.

 •Observe all governing codes, ordinances, and safety

instructions.

 •Be sure to leave these instructions with the consumer.

Parts includes:

Qty.Part number

1

PREF-B019MRP0

Flush Mount

Deector Vent

2LX-CZB055MRE0

Mounting screws

TINSEB541MRR2

A. 6" (152.40 mm)

B. Suggested electrical outlet location

C. Anti-Tip block

D. 5" (127 mm)

E. 3-1/2" (88.90 mm)

F. 4" (101.60 mm)

G. 24-3/16" (614.35 mm) minimum

24-1/2" (622.3 mm) maximum

H. 14-13/16" (376.24 mm) to bottom of

Anti-Tip block

I. 1-1/16" (26.97 mm)

J. 23-1/2" (596.90 mm) minimum depth

K. 22-1/8" (561.97 mm)

L. 1-3/4" (44.45 mm)

M. 16-7/8" (428.62 mm) opening

N. Floor must support 100 lb (45.4 kg)

O. 1-3/4" (44.45 mm)

A. 22" (558.8 mm) mounting cleat opening width

B. 1/4" (6.35 mm)

C. 1-1/16" (26.97 mm)

Specyfikacje produktu