Instrukcja obsługi Sharp XG-MB70X

Sharp Projektor XG-MB70X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp XG-MB70X (81 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.9 gwiazdek

Pobierz PDF

Strona 1/81

MULTIMEDIA PROJECTOR

MODEL

XG-MB70X

OPERATION MANUAL

Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix

IMPORTANT

For your assistance in reporting the loss or theft of your

Projector, please record the Serial Number located on

the bottom of the projector and retain this information.

Before recycling the packaging, please ensure that you

have checked the contents of the carton thoroughly

against the list of “Supplied accessories” on page 10.

Model No.: XG-MB70X

Serial No.:

SPECIAL NOTE FOR USERS IN THE U.K.

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should

the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as

above, which is also indicated on the pin face of the plug, must be used.

Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.

In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the

mains plug and fit an appropriate type.

DANGER:

The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of

in a safe manner.

Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious

electric shock may occur.

To fit an appropriate plug to the mains lead, follow the instructions below:

WARNING:

THIS APPARATUS MUST BE EARTHED.

IMPORTANT:

The wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow : Earth

Blue : Neutral

Brown : Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows:

•The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by

the letter E or by the safety earth symbol or coloured green or green-and-yellow.

•The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured

black.

•The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured

red.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

Specyfikacje produktu

Marka:	Sharp
Kategoria:	Projektor
Model:	XG-MB70X
Waga produktu:	4100 g
Poziom hałasu:	35 dB
Współczynnik kontrastu (typowy):	2000:1
Wymiary produktu (SxGxW):	310 x 287 x 104 mm
Pozycjonowanie na rynku:	Przenośny
Zasięg skanowania w poziomie:	15 - 70 kHz
Zasięg skanowania (długość):	45 - 85 Hz
Inne połączenia:	Component (via 15 pin d-sub)\nS-Video\nComposite
System formatu sygnału analogowego:	NTSC, PAL, SECAM
Wyjście audio:	2w mono
Jasność projektora:	3000 ANSI lumenów
Naturalna rozdzielczość projektora:	XGA (1024x768)
Rodzaj źródła światła:	Lampa
Moc lampy:	275 W
Żywotność źródła światła:	2000 h