Instrukcja obsługi Sharp YC-QG302AE
Sharp
Magnetostrykcja
YC-QG302AE
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp YC-QG302AE (58 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 5.0 gwiazdek
Strona 1/58
*Product images are for illustration purpose only. Actual product may vary.
YC-QS302A, YC-QG302A
Microwave oven
User manual
INVERTER
EN PTDE FR NLES PL IT
EN – 10
EN – 10
EN – 10
EN – 10EN – 10
applications such as; Kitchen areas reserved for sta in
stores, o ces and other professional environments / Farms
/ Use by clients of hotels, motels and other residential type
environments / Bed and breakfast type environments.
This symbol means that the surfaces are liable to get
hot during use.
INSTALLATION
1. Remove all packing materials from the inside of the oven cavity and remove any protective lm found on the
microwave oven cabinet surface.
2. Check the oven carefully for any signs of damage.
3. Place the oven on a secure, level surface, strong enough to take the oven weight, plus the heaviest item likely to
be cooked in the oven. Do not place the oven in a cabinet.
4. Select a level surface that provide enough open space for the intake and/or outlet vents. See picture on the rst
page. The rear surface of appliance can be placed against a wall.
• The minimum installation height is 85 cm.
• A minimum space of 20 cm is required between the sides of the microwave oven and any adjacent walls or objects.
• Leave a minimum space of 30 cm above the oven.
• Do not remove the feet from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage the oven.
• Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to
your radio or TV reception.
20 cm
30 cm
85 cm
10 cm
20 cm
5. Securely connect the plug of the oven to a standard earthed (grounded) household electrical outlet.
WARNING:
Do not place the oven where heat, moisture or high humidity are generated, (for example, near or above a
conventional oven) or near combustible materials (for example, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.
Do not touch the exterior of the microwave oven during or shortly after operation as it will be hot.
EN
EN – 13
EN – 13
EN – 13
EN – 13EN – 13
CONTROL PANEL
1. DIGITAL DISPLAY – Cooking time, power,
indicators and clock time are displayed.
2. 10 SECONDS, 1 MINUTE, 10 MINUTES –
Use to set time of cooking or the clock.
3. AUTO MENU keys – Press to select auto
cooking menu. (Refer to page 16 for
advice on use).
4. START/QUICK START – (Page 14).
5. MICROWAVE POWER – Press to select
microwave power level. (Page 14).
6. GRILL – Press to set grill cooking
program. (Page 15).
7. MICROWAVE+GRILL – Press to set
microwave and grill combination cooking
program. (Page 15).
8. UP – Press to set food weight or
servings.
9. DOWN – Press to set food weight or
servings.
10. STOP/ECO – Press once to temporarily
stop cooking, or twice to cancel cooking
altogether. Use to set power saving mode. (Page 17).
11. CHILD LOCK – (Page 18).
12. TIME/SET CLOCK –
Use to set clock time. Use to set timer function. (Page 14).
BEFORE USING THE OVEN
When the oven rst plugged in, beep will sound and the display will show " ". Note that the clock does not have to 1:00
be set for the oven to operate correctly. To set the clock, follow the instructions in the “ ” section of Setting the Clock
this User Manual.
When new, the very rst time the grill and/or convection is used, smoke and odors will be given o . To avoid this
happening when food is being cooked, use the grill and convection function without food for approx. 20 minutes.
• After opening and closing the door, the oven will enter the standby mode. If no buttons are press within 1 minute,
the display will remain on and the buttons will not operate. To enter standby mode again, open and close the door.
• During cooking, if the STOP/ECO button is pressed once, the cooking cycle will be paused. To restart cooking press
the START/QUICK START STOP/ECO button. If the button is pressed twice, cooking will be canceled.
• When programming the oven for a particular function and there is a pause between button presses of more than 30
seconds the oven will return to the standby mode.
• When a cooking cycle is completed, the display will show “ ” and a tone will be heard every two minutes until a End
button is pressed or the door is opened.
3
2
11
5
12
98
10
4
1
11
3
2
12
9
5
7
6
8
10
4
1
Specyfikacje produktu
| Marka: | Sharp |
| Kategoria: | Magnetostrykcja |
| Model: | YC-QG302AE |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sharp YC-QG302AE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Magnetostrykcja Sharp
12 Stycznia 2025
5 Stycznia 2025
24 Grudnia 2024
15 Października 2024
13 Października 2024
11 Października 2024
10 Października 2024
8 Października 2024
8 Października 2024
5 Października 2024
Instrukcje Magnetostrykcja
- Magnetostrykcja Sencor
- Magnetostrykcja Bertazzoni
- Magnetostrykcja Commercial Chef
- Magnetostrykcja Mellerware
- Magnetostrykcja Thor
- Magnetostrykcja Cosmo
- Magnetostrykcja Denver
- Magnetostrykcja Jocel
- Magnetostrykcja AEG-Electrolux
- Magnetostrykcja Wolkenstein
- Magnetostrykcja Aftron
- Magnetostrykcja Menumaster (Amana)
- Magnetostrykcja Teka
- Magnetostrykcja Smeg
- Magnetostrykcja Kelvinator
Najnowsze instrukcje dla Magnetostrykcja
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025