Instrukcja obsługi Speco Technologies HLPR1TW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies HLPR1TW (4 stron) w kategorii kamera. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 9 użytkowników na średnio 4.5 gwiazdek

ITEM №: HLPR1TW

Adjustable function

1. Resistor A: If you want to change the working time of IR Led, please

open the cover at the bottom of the camera(As showed in the following

picture), you can adjust the IR LED working time.Anticlockwise refers to the

IR LED will start working under the darker situation. clockwise refers to the

IR LED will start working under the brighter situation.

2. Resistor B: If you want to change the intensity of the IR light, please

open the cover at the bottom of the camera(As showed in the following

picture), you can adjust the IR light intensity.

When you feel EXPOSURE on the plate, please lower down IR intensity;

when you feel DARK on the plate, please increase IR intensity, IR intensity

please refer to picture shown 。

Packing

* Camera Hexagonal Wrench X1*X1

* User Manual Mounting drawing paper X1*X1

* Screw X3 Junction Box *X1

* Plastic-Conical-Anchor X3 Power Cable Connector X1 *

* Junction box(including accessories) X1

Specification

ITEM

HLPR1TW

IP Rating

IP66

Type

Color/Monochrome

Signal System

NTSC/PAL

Pick Up Device

1/2.9" 2.2 Mega Pixels CMOS

Picture Elements

1920(H)X1080(V)

Min Illumination

0Lux（42 Pieces IR LED ON）

S/N Ratio

≥52dB

Lens

9-22mm Motorized Varifocal Auto iris IR Lens

M ph

28 miles/h

3D/2D

ON

SENS-UP

OFF

IR SMART

ON

White Balance

ATW

Back Light Compensation

OFF

DWDR

OFF

Video Out- put

HD-TVI/HD-AHD/HD-CVI/CVBS

Power Supply

DC12V ±%/AC24V10±10%

Current Consumption

DC:580mA/AC0mA (Max) 25

IR Effect Distance

2~15m（ ）6.56~49.18ft(Outdoor)

Dimension

231×84X110mm (9.1”×3.3”×4.3” )

Weight

1260g/2.78pounds (Including Junction Box)

Storage Temperature

- +6030～℃(-+14022～℉)

Operating Temperature

- +4030～℃(-+10422～℉)

Remark: Non-regulative adaptor may cause camera damaged.

License Plate Capture Camera

Resistor A

Resistor B

Specyfikacje produktu