Instrukcja obsługi Stihl FG 3

Stihl Maszyna do piłowania FG 3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stihl FG 3 (10 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/10

english

FG 3

Dear Customer,

Thank you for choosing a quality

engineered STIHL product.

This machine has been built using

modern production techniques and

comprehensive quality assurance.

Every effort has been made to ensure

your satisfaction and troublefree use

of the machine.

Please contact your dealer or our

sales company if you have any

queries concerning your machine.

Hans Peter Stihl

Pictograms

All the pictograms attached to the

machine are shown and explained in the

this manual.

The operating and handling instructions

are supported by illustrations.

Symbols in text

The individual steps or procedures

described in the manual may be marked

in different ways:

:Step or procedure without direct

reference to an illustration.

Description of step or procedure that

refers directly to the illustration and

contains item numbers that appear in

the illustration.

Example:

Loosen the screw (1)

Lever (2) ...

In addition to the operating instructions,

this manual may contain paragraphs

that require your special attention. Such

paragraphs are marked with the

symbols described below:

Warning where there is a risk of an

accident or personal injury or

serious damage to property.

Warning where there is a risk of

damaging the power tool or

individual components.

Note or hint which is not essential

for using the power tool, but may

improve the operator’s under-

standing of the situation and result

in better use of the power tool.

Note or hint on correct procedure in

order to avoid damage to the

environment.

Guide to Using this Manual

Printing inks contain vegetable oils;

paper can be recycled.

0458 566 7721. M2. K1. T. Printed in Germany

13FG 3

english

Equipment and features

This instruction manual refers to

several models with different

features. Components that are not

installed in all models and related

applications are marked thus

Such components are available as

special accessories from your

STIHL dealer.

Engineering improvements

STIHL’s philosophy is to continually

improve all of its products. As a result,

engineering changes and improvements

are made from time to time. If the

operating characteristics or the

appearance of your machine differ from

those described in this manual, please

contact your STIHL dealer for

assistance.

To reduce the risk of

personal injury, special

safety precautions must

be observed while

operating the filing tool.

Read the operating

instructions carefully and

keep them in a safe place

for later reference.

Always shut off the saw engine before

working with the filing tool:

Move Master Control lever / slide control

or the separate stop switch to

STOP or $.

Electric saws: Disconnect plug from

power supply.

Wear gloves.

It is absolutely essential to comply with

the angles and dimensions specified in

these instructions. If the saw chain is

incorrectly sharpened – and in

particular if the depth gauges are set too

low – there is a risk of increased saw

kickback and personal injury.

Observing the safety precautions and

specifications in these instructions and

the owner’s manual of the saw model on

which the filing tool is mounted can help

reduce the risk of injury and damage to

the saw.

The STIHL filing tool can be used to

sharpen all STIHL Oilomatic saw chains

with the exception of square ground

chains (RSL, RSLF, RSLH) and carbide-

tipped chains (RD, RDS). Sharpening is

effected with the guide bar and chain

mounted on the saw.

For accurate results it is best to clamp

the guide bar in a bench vise or, at the

cutting site, in the STIHL bar vise

(special accessory).

File correctly

– Sharpen the chain frequently, take

away as little metal as possible –

two or three strokes of the file are

usually enough.

– Always file from the inside to the

outside of the cutter.

– The file only sharpens on the

forward stroke – lift the file off the

cutter on the backstroke.

– Avoid touching the tie straps and

drive links with the file.

Safety Precautions Application

Specyfikacje produktu

Marka:	Stihl
Kategoria:	Maszyna do piłowania
Model:	FG 3
Kolor produktu:	Czarny
Wysokość produktu:	12 mm
Szerokość produktu:	70 mm
Głębokość produktu:	40 mm
Waga produktu:	40 g
Czas odtwarzania muzyki:	- h
Wbudowane głośniki:	Tak
Wyjścia słuchawkowe:	2
Technologia baterii:	Litowo-jonowa (Li-Ion)
Typ ekranu:	LCD
Długość przekątnej ekranu:	1.8 "
Obsługiwane typy kart pamięci:	Nieobsługiwany
Ekran dotykowy:	Nie
Obsługiwane formaty audio:	MP3,WAV,WMA
Obsługiwane formaty plików wideo:	MPEG4
Liczba portów USB 2.0:	1
Waga wraz z opakowaniem:	300 g
Ładowanie akumulatora:	Tak
Wymiary opakowania (SxGxW):	155 x 50 x 155 mm
Nagrywanie głosu:	Tak
Radio FM:	Tak
Wbudowany mikrofon:	Tak
Tryby korekcji:	zwyczaj
Format kompresji zdjęć:	JPG
Zasilane prze USB:	Tak
Całkowita pojemność przechowywania:	8 GB
Typ urządzenia grającego:	Pamięć Flash
USB:	Tak
Liczba wyrównywaczy pasm:	6
Pokrowiec:	Tak
Pasek na szyję:	Tak
Przewód USB:	USB
CD-ROM:	Tak