Instrukcja obsługi Sun Joe 24V-PS8-CT
                    Sun Joe
                    
                    Maszyna do piłowania
                    
                    24V-PS8-CT
                
                                
    Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe 24V-PS8-CT (72 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.1 gwiazdek
                        Strona 1/72
                    
                    
                    
 Model 24V-PS8-CT Form No. SJ-24V-PS8-CT-880E-MR2
CORDLESS POLE CHAIN SAW – TOOL ONLY
8-INCH | 24-VOLT MAX* | MULTI-ANGLE
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
EN
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
IMPORTANT!
Safety Instructions
All Operators Must Read These 
Instructions Before Use
Always follow these safety guidelines. Failure to do so may 
result in serious bodily injury or death.
General Safety 
mWARNING! This appliance is not intended for use 
by children or by unassisted, unsupervised persons whose 
physical, sensory or mental capabilities prevent them from 
using it safely. Children should be supervised to ensure that 
they do not play with the appliance.
Before starting up your machine, please check it carefully for 
any defects. If you nd any, do not start up your machine. 
Contact your authorized Snow Joe® + Sun Joe® dealer or 
call the Snow Joe® + Sun Joe® customer service center at 
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the power tool, basic safety 
precautions should always be followed to reduce the risk of 
re, electric shock, and personal injury. These include:
 1.  Keep work area clean and well-lit – Cluttered, dark 
areas invite accidents.
 2.  Avoid dangerous environments – Do not use the power 
tool in rain, in damp or wet locations, or in bad weather, 
especially when there is a risk of lighting. This decreases 
the risk of being struck by lighting. Do not operate the 
power tool in gaseous or explosive atmospheres or use 
the power tool near ammable or combustible liquids. 
Motors in these tools normally spark, and the sparks 
might ignite fumes.
 3.  Know your product – Know how to start and stop the 
machine. Be thoroughly familiar with the controls.
 4.  Keep children, bystanders, and pets away –  
All spectators, including pets, should be kept a safe 
distance away from the work area.
 5.  Dress properly – Do not wear loose clothing or jewelry. 
They can get caught in moving parts. Protective rubber 
gloves and non-slip footwear are recommended when 
working outdoors.
6.  mCAUTION! – Exercise caution to avoid slipping or 
falling. Wear protective footwear that will protect your feet 
and improve your footing on slippery surfaces.
 7.  Stay alert – Watch what you are doing. Use common 
sense. Do not operate the power tool when you are tired, 
or under the inuence of alcohol or drugs.
 8.  Do not overreach – Keep proper footing and balance at  
all times.
 9.  Prevent unintentional starting – Ensure the switch is in 
the o-position before connecting to battery pack, picking 
up or carrying the appliance. Carrying the appliance with 
your nger on the switch or energizing appliance that have 
the switch on invites accidents.
   This warning is not applicable for batteries that NOTE: 
cannot be disconnected from the appliance in normal use.
10.  Use the right appliance – Do not use the power tool 
for any applications other than those for which it was 
intended.
11.  Blades are sharp – Don't grasp the exposed cutting 
blades or cutting edges when picking up or holding the 
power tool.
12.  Use two hands – Hold the telescoping pole and handle 
with both hands to avoid loss of control.
13.  Remove the battery – Remove the battery from the 
power tool when it is not in use, before servicing it, when 
changing accessories, and when performing any other 
maintenance task.
14.  Use safety glasses – Also use safety footwear, snug-
tting clothing, protective gloves, hearing and head 
protection.
15.  Use head protection – Always use head protection when 
operating the power tool overhead. Falling debris can 
result in serious personal injury.
16.  Do not force the tool – It will perform better with less 
likelihood of personal or mechanical injury if it is used at 
the rate for which it was designed.
17.  Store indoors – When not in use, the power tool should 
be stored indoors in a dry and high or locked-up place out 
of the reach of children.
Specyfikacje produktu
| Marka: | Sun Joe | 
| Kategoria: | Maszyna do piłowania | 
| Model: | 24V-PS8-CT | 
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sun Joe 24V-PS8-CT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Sun Joe
                        
                         11 Stycznia 2025
                        
                    
                                                            
                        
                         7 Stycznia 2025
                        
                    
                                                            
                        
                         30 Grudnia 2025
                        
                    
                                                            
                        
                         30 Grudnia 2025
                        
                    
                                                            
                        
                         24 Września 2024
                        
                    
                                                            
                        
                         20 Września 2024
                        
                    
                                                            
                        
                         16 Września 2024
                        
                    
                                                            
                        
                         15 Września 2024
                        
                    
                                                            
                        
                         14 Września 2024
                        
                    
                                                            
                        
                         5 Września 2024
                        
                    
                                                            Instrukcje Maszyna do piłowania
- MTM
- Exakt
- HiKOKI
- Solo
- Gude Pro
- Skil
- Ribimex
- Matrix
- Bebe Confort
- BabyGO
- DEDRA
- Flex
- Yato
- Narex
- Ergotools Pattfield
Najnowsze instrukcje dla Maszyna do piłowania
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         29 Marca 2025