Instrukcja obsługi Sun Joe SWJ700E
                    Sun Joe
                    
                    Maszyna do piłowania
                    
                    SWJ700E
                
                                
    Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe SWJ700E (72 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.3 gwiazdek
                        Strona 1/72
                    
                    
                    
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
®, LLC Model SWJ700E Form No. SJ-SWJ700E-MR3
R
OPERATOR’S MANUAL
ELECTRIC CHAIN SAW
16-INCH | 14-AMP
IMPORTANT!
Safety Instructions
All Operators Must Read These 
Instructions Before Use
Read all the instructions contained in this manual. Keep this 
manual in a safe place, so that the information is available at 
all times. If you give the equipment to another person, make 
sure to provide these operating instructions. Basic safety 
precautions should always be followed to reduce the risk of 
re, electric shock, and personal injury. 
Notice the personal safety alert symbol m used in this 
manual to draw your attention to a  given along WARNING 
with the particular operating instruction. This means that the 
operation requires special ATTENTION, CAUTION,  
and AWARENESS.
Intended use
This machine was designed and manufactured for felling, 
bucking, and delimbing trees or cutting wooden objects with 
dimensions suitable for the cutting bar's capabilities.
Improper use
Any other use diering from the above mentioned applications 
poses a serious hazard to the user and may damage both the 
tool and your personal property. Examples of improper use 
include, but are not limited to:
•  trimming hedges;
•  carving;
•  sectioning pallets, crates, and various packing materials;
•  sectioning furniture or other materials with nails, screws, or 
other metal components;
•  butchering meat;
•  using the machine to lift, move, or split objects;
•  using the machine while fastened to xed supports.
Improper use of the machine will invalidate the warranty, 
relieve the manufacturer from all liabilities, and the user will 
consequently be liable for any and all damage or injury to 
himself/herself or others.
General Safety 
mWARNING! When using electric yard tools, basic safety 
precautions should always be followed to reduce the risk of 
re, electric shock, and personal injury, including the following:
1.  Keep guards in place – Protective guards should be 
checked periodically to ensure they are properly tted and 
in correct working order.
2.  Remove adjusting keys and wrenches – Check that 
adjusting wrenches are removed from the saw before 
turning it on.
3.  Keep work area clean and well-lit – Clear work area of 
branches and limbs after each cutting session. Cluttered 
areas invite accidents.
4.  Avoid dangerous conditions – Do not use this machine 
in rainy, stormy, damp, or wet locations. Do not operate 
the unit in gaseous or explosive atmospheres. Motors in 
these units normally spark, and the sparks may  
ignite fumes.
5.  Do not use the chain saw in the rain.
6.  Keep bystanders and children away – All bystanders, 
including children and pets, should be kept a safe 
distance away from the work area.
7.  Do not force the tool – It will do the job eectively and 
safely if it is used at the rate for which it was designed. 
8.  Use the right tool – Do not force the tool or any 
attachment on the tool to do a job for which they were  
not designed. 
9.  Wear proper apparel – Do not wear loose articles of 
clothing or jewelry since such items may get caught 
in moving parts. Use of heavy-duty rubber gloves, 
substantial non-skid footwear, and close-tting clothing is 
recommended when working outdoors with power tools.
10.  Wear protective hair coverings to contain long hair. 
11.  Always wear safety glasses and ear defenders to 
provide eye and ear protection – Everyday eyeglasses 
only have impact resistant lenses and do not provide the 
same protection as safety glasses.
12.  Wear face or dust masks – If the cutting operation is 
dusty, the use of a face or dust mask specially designed 
to lter out microscopic particles is recommended.
13.  Do not overreach – Keep proper footing and balance  
at all times.
Specyfikacje produktu
| Marka: | Sun Joe | 
| Kategoria: | Maszyna do piłowania | 
| Model: | SWJ700E | 
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sun Joe SWJ700E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Sun Joe
                        
                         11 Stycznia 2025
                        
                    
                                                            
                        
                         7 Stycznia 2025
                        
                    
                                                            
                        
                         30 Grudnia 2025
                        
                    
                                                            
                        
                         30 Grudnia 2025
                        
                    
                                                            
                        
                         24 Września 2024
                        
                    
                                                            
                        
                         20 Września 2024
                        
                    
                                                            
                        
                         16 Września 2024
                        
                    
                                                            
                        
                         15 Września 2024
                        
                    
                                                            
                        
                         14 Września 2024
                        
                    
                                                            
                        
                         5 Września 2024
                        
                    
                                                            Instrukcje Maszyna do piłowania
- McCulloch
- Kreg
- TAURUS Titanium
- RIKON
- Sthor
- Black Decker
- Cobra
- ACG
- Shindaiwa
- Homelite
- Porter-Cable
- Matrix
- MacAllister
- PowerPlus
- Florabest
Najnowsze instrukcje dla Maszyna do piłowania
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         1 Kwietnia 2025
                        
                    
                                                            
                        
                         29 Marca 2025