Instrukcja obsługi Synco CMic-V2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Synco CMic-V2 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.5 gwiazdek
Strona 1/2

Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Microphone CMic-V2 User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
1. The Use of Pop Filter
3. The Use of Microphone
Product Introduction
Operations
Please install the pop lter to the microphone for
blocking air blasts.
1) Use with computer
Connect the mic with the computer
via the USB-A to USB-A cable.
2) Use with smart phone/ tablet
Connect the mic with the device via
the USB-A to Type-C cable.
2. The Use of Desktop Mic Holder
Specications
1. Polar Pattern: Cardioid
① Condenser Capsule
② Working Indicator
Green:Working Red:Muting
③ Mic Volume
④ Monitor Volume
⑤ Mute Mode
First press to initiate mute mode, second
press to turn off mute mode.
⑥ 3.5mm Monitoring Jack
Used for plug-in earphones to monitor
the recording in real time. Please mind the
loudness.
⑦ USB Output

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us
via Email:support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact
a local agent for assistance, or you can always contact SYNCO’s customer
service through email at
support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts
cost will be charged.
Transducer
Frequency Response
Sample/Bit Rate
Signal/Noise
Sensitivity
THD
Impedance
Output Connector
Power Requirement
Dimensions
Cable Length
Weight
Electret Condenser
20Hz-20KHz
192KHz/24-bit
>90dB (1KHz, RL = innity)
-36dB (1V/Pa at 1KHz)
<0.05% (1KHz/0dBFS)
≤2.2KΩ
USB
5V 125mA
47×47×156mm
1.8m
490g
2. Performance Parameter
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to limited warranty service. 12-month
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to material
defection or technological problem, the defective product or defective part will
be repaired or replaced without charge (service and materials fee).
Warranty
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu, battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Specyfikacje produktu
Marka: | Synco |
Kategoria: | mikrofon |
Model: | CMic-V2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Synco CMic-V2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Synco
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
29 Marca 2025
27 Marca 2025
27 Marca 2025
Instrukcje mikrofon
- mikrofon Blue Microphones
- mikrofon Konig & Meyer
- mikrofon SPL
- mikrofon Bigben
- mikrofon JLab
- mikrofon Clockaudio
- mikrofon Line 6
- mikrofon Axis
- mikrofon Reloop
- mikrofon Livoo
- mikrofon Hohem
- mikrofon Switchcraft
- mikrofon Primus
- mikrofon American DJ
- mikrofon Pixel
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025