Instrukcja obsługi Synco P2L
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Synco P2L (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 3.7 gwiazdek
Strona 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned herein.
Microphone P2L User Manual
Caring For Your SYNCO Product
Package List
Product Instruction
Operations
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
TX Transmitter x2
RX Receiver (Lightning
Connector) x1 Wireless Charging Case x1
Charging Cable x1
Type-C to 3.5mm Adapter x1
TX Transmitter
TX Transmitter
RX Receiver
RX Receiver
Wireless Charging Case
Wireless Charging Case
Indicator — Transmitter (Double press the Power button to turn o light eect)
Indicator — Receiver
Indicator — Wireless Charging Case
① Power
② Working Indicators
③ Built-in Mic
④ Contacts
⑤ Pocket Clip
① Vocal Eects/ Mono/Stereo
② Type-C Port
③ Working Indicators
④ Connector
⑤ Contacts
① Pairing/ Power Prompt
② Type-C Port
③ Working Indicators
④ Contacts
1. Usage
2. Pairing
3. Charging
4. Check the power
5. Use vocal eects
① Tap on the right side of charging case to pop out the drawer
② Take the TX and RX out
③ TX should boot automatically as it leaved the case, and switch itself o automatically
when returning to the case.
(Forcible switch: Long press the Power button on TX for 3 seconds)
④ RX should boot automatically as it is plugged into smartphone
① Place the TX and RX in the case with their contacts are connected with the case’s
② Long press the Pairing button on the case for 3 seconds with the drawer open
③ The indicators on the TX and RX should light up and illuminate sequentially when
pairing is successful
Note: The transmitter will automatically switch o if it is unpaired or disconnected for 5
minutes.
Charge the TX: Place the TX in the case with contacts connected with the case’s.
Charge the case: Connect the case with power supply via the charging cable.
TX: Short press the Power button, the indicators will light up according to remain power
for 5 seconds
Charging Case: Short press the Power Prompt button, the indicators will light up
according to remain power for 5 seconds
Short press the Vocal Eects button on the receiver to switch sound eects: Original >> Studio FX >> KTV FX >> Voice
Amplication >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.
Default eect: Original.
Note: The vocal eect will apply to both transmitters. In Stereo mode, only original is supported. Other vocal eects are
unavailable.
System unpaired
Pairing
System unpaired
Charging, and then turns o when fully charge
Stereo mode (Only original is supported)
System paired, normal working
System paired
Mono mode-Original sound
Low battery
Mono mode-Vocal eects on
Flash concurrently
Illuminate sequentially
Flash concurrently
Single light keeps on (light eect o)
Single light keeps on & Illuminate sequentially
Single light keeps on (in the case)
Single light keeps on & Illuminate sequentially
two-way
Illuminate sequentially(light eect on)
Illuminate sequentially
Single light ashes
Single light ashes twice & Illuminate sequentially
Working
Indicators(White
Light)
Working
Indicators(White Light)
Working
Indicators
(White
Light)
Working
Indicators(Red Light)
Long press for 3 seconds
6. Mono/ Stereo
Mono-Original
Mono-Other vocal eects
Mono-Original
Long press the Mono/Stereo button on the RX once
Long press the Mono/Stereo button on the RX once
Long press the Mono/Stereo button on the RX once
Stereo
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of
element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the code on the product or warranty certicate
is altered or torn o
All consumable accessory attached to a product, like cable, wind mu, battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can
always contact SYNCO’s customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase. If any of these documents is missing,
only sales return or chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under
normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to limited warranty service. The warranty period begins on the date of 12-month
purchase of brand new, unused products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the
defective product or defective part will be repaired or replaced without charge (service and materials fee).
Warranty
WARRANTY CERTIFICATE
USER INFORMATION
SALES INFORMATION
REPAIR RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
TX Transmitter
RX Receiver
Specications
Wireless Transmission
RF Frequency Band
Frequency Response
Working Distance
Sampling Rate
Bit Depth
Sensitivity
SNR
RF Output Power
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Wireless Transmission
RF Frequency Band
Digital 2.4GHz
2400-2483.5MHz
20Hz-20KHz
492ft/150m(LOS area); 164ft/50m(NLOS area)
48KHz
16Bit
-26dB
>75dB
10dB
Built-in Lithium Battery, 120mAh
1.5H
5H
49x19x19 (mm)
ABS
10g
Digital 2.4GHz
2400-2483.5MHz
Working Distance
Sampling Rate
Bit Depth
Antenna
Monitoring
Connector
Power Input
Dimensions
Material
Weight
492ft/150m(LOS area); 164ft/50m(NLOS area)
48KHz
16Bit
Built-in
3.5mm In-Ear Monitoring
Lightning Output
Type-C
49x30x9 (mm)
ABS
5g
Wireless Charging Case
Battery Type
Battery Charging Time
Charging Port
Power Requirements
Dimensions
Weight
Built-in Lithium Battery, 700mAh
2H
Type-C Port
5V 2A
70x68x38mm
87.5g
8. In-Ear monitoring
Plug the included Type-C to 3.5mm Adapter into the Type-C Port on the receiver. Then plug in your headphones to real-
time monitor mic recording and device’s backgrounding.
Note: The included Type-C to 3.5mm Adapter is exclusive, not available for other devices.
7. Charging phone device
Plug your phone charging cable into the Type-C Port on the receiver.
Specyfikacje produktu
| Marka: | Synco |
| Kategoria: | mikrofon |
| Model: | P2L |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Synco P2L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Synco
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
29 Marca 2025
27 Marca 2025
27 Marca 2025
Instrukcje mikrofon
- mikrofon Williams Sound
- mikrofon ITek
- mikrofon Audix
- mikrofon President
- mikrofon Scope Labs
- mikrofon Vonyx
- mikrofon Kopul
- mikrofon Schoeps
- mikrofon IC Intracom
- mikrofon The T.bone
- mikrofon Antelope Audio
- mikrofon MXL
- mikrofon Universal Audio
- mikrofon Fenton
- mikrofon Artsound
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025