Instrukcja obsługi Taylor 3710-21

Taylor waga kuchenna 3710-21

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Taylor 3710-21 (2 stron) w kategorii waga kuchenna. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 16.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/2

Mechanical Kitchen Scale

3710

Leading the Way in Accuracy

Instruction Manual

Instruction ManualInstruction Manual

Thank you for purchasing a Taylor® Kitchen Scale. Your Taylor® scale is an

example of superior design and craftsmanship. Please read this instruction

manual carefully before use. Keep these instructions handy for future

reference.

1. Place the scale base on a hard, level surface.

2. There may be pieces of cardboard and plastic fasteners between the

base and platform support bar to prevent damage during shipping. Do

not remove cardboard stabilizers until instructed to do so.

3. On the platform support bar on the top of the scale, there are 2 screws in

the outermost holes. Loosen and remove the screws. Set the screws aside.

Take care not to misplace the screws.

4. Place the bowl frame on the platform support bar. Line up two of the

crossbar screw holes with the screw holes on the support bar.

5. Place one of the screws through the top of one of the holes. Tighten the

screw with a Philips screwdriver. Repeat with the other screw hole.

6. Remove cardboard stabilizers

7. The scale may be disassembled for storage by removing the weighing tray

and loosening the screws and removing the crossbar.

1. Place the scale base on a hard, level surface. Place the weighing tray so

that it is stable on top of the base unit.

2. 0The pointer should indicate “ ” before objects to be weighed are placed

on the scale. To adjust the pointer to “ ”, use the adjustment dial located 0

on the top of the base unit.

3. Carry the scale by holding the base unit. Take care not to drop the tray. If

the scale is relocated, recalibration to “ ” may be required. To do so, 0

repeat steps 1 and 2.

Assembly Instructions

Calibration/General Weighing Operation

Taylor® warrants this product to be free from defects in material or

workmanship for one (1) year from date of original purchase for the original

purchaser. It does not cover damages or wear resulting from accident,

misuse, abuse, commercial use, or unauthorized adjustment and/or repair.

If service is required, do not return to retailer. Should this product require

service (or replacement at our option), please pack the item carefully and

return it prepaid, along with store receipt showing the date of purchase and a

note explaining reason for return to:

There are no expressed warranties except as listed above. This warranty gives

you specific legal rights, and you may have other rights which vary from state

to state.

For additional product information, or warranty information in Canada or

elsewhere outside the USA, please contact us through www.taylorusa.com.

reserved. Taylor® and Leading the Way in Accuracy® are registered

trademarks of Taylor Precision Products and its affiliated companies. All rights

reserved.

Made to our exact specifications in China.

Not legal for trade.

www.taylorusa.com

1. The scale base is not dishwasher safe. Immersing the scale in water may

trap liquid between the lens and the body that cannot be effectively

dried-out. Damage will void warranty.

2. An occasional wiping with a soft cloth and mild soap will keep your Taylor®

scale clean and attractive. Do not use abrasive cleaners. Your Taylor®

scale does not require oiling or lubrication of any kind.

3. The weighing tray is top dishwasher safe.

4. Do not put either the base unit or the tray in a microwave.

5. Protect the scale from flames, heat, direct sunlight and high humidity.

6. Do not tamper with the scale's internal components. Doing so will

invalidate the warranty on this unit and may cause damage. The scale

contains no user-serviceable parts.

Care and Maintenance

One Year Limited Warranty

3710 9.09

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

Specyfikacje produktu

Marka:	Taylor
Kategoria:	waga kuchenna
Model:	3710-21
Kolor produktu:	Stal nierdzewna
Typ wyświetlacza:	Analogowy
Położenie urządzenia:	Blat
Model:	Waga kuchenna mechaniczna
Maksymalna waga:	5 kg
Materiały:	Stal nierdzewna
Dokładność:	- g
Kształt:	Prostokąt