Instrukcja obsługi Taylor TP16FF
Taylor
waga kuchenna
TP16FF
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Taylor TP16FF (4 stron) w kategorii waga kuchenna. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.9 gwiazdek
Strona 1/4
Compact Mechanical
Portion Control Scales
Instruction Manual
TP16,
TP16FF,
TP32
1
Leading the Way in Accuracy®
2
Thank you for purchasing a Taylor® Portion Control
scale. Your Taylor® scale is an example of superior
design and craftsmanship. Please read this instruction
manual carefully before use. Keep these instructions
handy for future reference.
General Operation
1. Place the scale on a hard, level surface
2. Before using the scale, allow it to reach room
temperature, then perform the following steps:
A. Place weight on scale and allow pointer to come
to rest.
B. Remove weight and allow pointer to come to rest.
C. After repeating this cycle two or three times,
adjust pointer to zero using the adjustment knob
located on top of the scale body, beneath the
platform, and repeat the adjustments until zero is
stabilized.
3. If scale is relocated, readjustment to zero may be
required. To do so, repeat above steps. When
weighing, evenly distribute weight on platform.
Soft Serve Calibrator Feature
(Model TP32 only)
This model has the percentage of overrun scales
for a pint sample or a quart sample. Refer to your
manual for the soft serve machine manufacturer’s
recommendation.
1. You will need an accurate one pint or one quart
measuring cup to hold the sample.
2. You must tare-out (Re-Zero) the scale with the empty
cup to be used.
3. Be sure to Re-Zero the scale after the calibration of
your soft serve machine.
Care and Maintenance
1. The body and mechanism are not dishwasher
safe. Immersing the scale in water may trap liquid
between lens and body that can not be effectively
dried out. Damage will void warranty.
2. Caution … An occasional wiping with a soft cloth
and mild soap will keep your Taylor® scale clean
and attractive. Do not use abrasive cleaners. Your
Taylor® scale does not require oiling or lubrication of
any kind.
3. Do not tamper with unit’s internal components.
Doing so will invalidate the warranty on this unit and
may cause damage. The unit contains no user-
serviceable parts.
4. The lens can
be removed by
pressing in on the
tab at the bottom
of the bezel and
pulling the lens/
bezel away from
the scale case.
There are two (2)
tabs at the top and
the entire lens/bezel
will lift up and out
of slots in the lens.
You can clean the
inside of the lens this
way but be careful
to not bend the red
pointer. Do the reverse to reattach and snap the
tab into its slot on the bottom.
3
Specyfikacje produktu
| Marka: | Taylor |
| Kategoria: | waga kuchenna |
| Model: | TP16FF |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Taylor TP16FF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje waga kuchenna Taylor
8 Stycznia 2025
8 Stycznia 2025
8 Stycznia 2025
27 Grudnia 2024
9 Października 2024
5 Października 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
Instrukcje waga kuchenna
- waga kuchenna Rösle
- waga kuchenna Bartscher
- waga kuchenna Techno Line
- waga kuchenna Qilive
- waga kuchenna Ikea
- waga kuchenna Laica
- waga kuchenna Morphy Richards
- waga kuchenna Maxwell
- waga kuchenna Maestro
- waga kuchenna Bestron
- waga kuchenna Dymo
- waga kuchenna CDN
- waga kuchenna Tor Rey
- waga kuchenna Inventum
- waga kuchenna DoughXpress
Najnowsze instrukcje dla waga kuchenna
3 Kwietnia 2025
3 Kwietnia 2025
30 Marca 2025
27 Marca 2025
17 Marca 2025
7 Marca 2025
25 Lutego 2025
24 Lutego 2025
24 Lutego 2025
21 Lutego 2025