Instrukcja obsługi Technoline WL 1000
Technoline
Radiobudzik
WL 1000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Technoline WL 1000 (2 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.7 gwiazdek
Strona 1/2
Year (flashing)
"Date. Month."
(for 24h time display)
"Month. Date."
(for 12h time display)
Minutes (flashing)
Hours (flashing)
AIR QUALITY MONITOR
Instructions manual
INTRODUCTION:
Congratulations on purchasing this Air Quality Monitor with display of
indoor temperature and humidity. It is further acting as a DCF-77 radio
controlled clock with calendar display and alarm clock function. This
innovative product is ideal for use in the home or office.
FEATURES:
• DCF radio controlled time with manual setting
• DCF Time reception ON/OFF
• Time zone setting: ± 12 hours
• 12/24h time display
• Calendar display
• Alarm setting with snooze function
• Indoor temperature display in ºC / ºF
• Indoor humidity display in RH%
• Air quality alert setting
• Air quality indicator
• Low battery indicator
• LED Back-light
SETTING UP:
1. Open the battery cover at the back of the air quality monitor as
indicated below.
2. Checking the correct polarization, insert 2 x C, IEC LR14, 1.5V
Alkaline batteries into the battery compartment and replace the
cover.
3. When the batteries are inserted, all the segments of the LCD
will light up briefly and a “beep” will sound. The air quality
monitor will now start receiving the DCF time signal. After
approximate 3 to 5 minutes, the DCF time will be displayed.
4. If after 10 minutes, the DCF time has not been received, press
the SET key to manually enter a time initially.
Note:
• The Equivalent CO
2
ppm will only be displayed after 30
minutes.
• The air quality sensor will take up to 5 days after inserting
batteries to condition itself for the room it is placed. If the unit is
placed into another room, there might be a reconditioning time
of several days as well.
INSTALLING AND REPLACING THE BATTERY IN THE
AIR QUALITY MONITOR
The air quality monitor
uses 2 x C, IEC LR14,
1.5V batteries. To
install and replace the
batteries, please
follow the steps below:
1. Remove the cover at the back of the air quality monitor.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
BATTERY CHANGE:
It is recommended to replace the batteries in the unit regularly to
ensure optimum accuracy of the unit (Battery life See Specifications
below).
Please participate in the preservation of the
environment. Return used batteries to an authorised
depot.
DCF RADIO CONTROLLED TIME
The time base for the radio controlled time is a Cesium Atomic Clock
operated by the Physikalisch Technische Bundesanstalt
Braunschweig which has a time deviation of less than one second in
one million years. The time is coded and transmitted from Mainflingen
near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a
transmitting range of approximately 1,500 km. Your radio-controlled
clock receives this signal and converts it to show the precise time in
summer or wintertime.
The quality of the reception depends greatly on the geographic
location. In normal cases, there should be no reception problems
within a 1,500 km radius of Frankfurt.
DCF reception is done twice daily at 02:00 and 03:00 am. If the
reception is not successful at 03:00 am, then the next reception takes
place the next day at 02:00 am.
If the tower icon flashes, but does not set the time or the DCF tower
does not appear at all, then please take note of the following:
• Recommended distance to any interfering sources like
computer monitors or TV sets is a minimum of 1.5 - 2 meters.
• Within ferro-concrete rooms (basements, superstructures), the
received signal is naturally weakened. In extreme cases,
please place the unit close to a window and/ or point its front or
back towards the Frankfurt transmitter.
• During nighttime, the atmospheric disturbances are usually less
severe and reception is possible in most cases. A single daily
reception is adequate to keep the accuracy deviation below 1
second.
KEY FUNCTIONS:
The Air Quality Monitor has 5 easy-to-use keys:
SET key:
• Press and hold to enter the manual setting modes: time zone,
DCF ON/OFF, 12/24 hour time display, manual time, calendar
display, snooze time, ºC / ºF temperature display, alert settings
• Press briefly to display the calendar for about 6 seconds
• Stop alarm ringing
+ key:
• Press to change, set, toggle all manual settings
• Stop alarm ringing
MODE key:
• Press to toggle between: alarm time, seconds, and Equivalent
CO
2
ppm display
• Stop alarm ringing
• Exit the manual setting mode
ALARM key:
• Press and hold to enter the alarm setting mode
• Activate / deactivate the alarm
• Stop alarm ringing
• Exit the manual setting mode
SNOOZE key:
• Enter snooze during alarm ringing
• Exit the manual setting mode
LCD SCREEN
MANUAL SETTINGS:
The following manual settings can be done in the setting mode:
• Time zone setting
• DCF ON/OFF setting
• 12/24 hour time setting
• Time setting
• Calendar setting
• Snooze setting
• ºC / ºF temperature display setting
• Air quality alert setting
Press and hold the SET button for about 3 second to enter the setting
mode:
TIME ZONE SETTING
The time zone default is "0 hour. To set a different time zone: "
1. The current time zone value starts flashing.
2. Use the key to set the time zone. The range runs from 0, 1, +
2…12, -12, -11, -10… -2, -1, 0, in consecutive 1-hour intervals.
3. Confirm with the key and enter the SET Time reception
On/Off setting.
TIME RECEPTION ON/OFF SETTING
In area where reception of the radio-controlled time (DCF time) is not
possible, the time reception function can be turned OFF. The clock will
then work as a normal quartz clock. (Default setting is ON).
1. The digit “ON” and tower icon will start flashing on the LCD.
2. Use the key to turn OFF the time reception function if +
necessary.
3. Confirm with the key and enter the SET 12/24 hour time
display setting.
Note:
If the Time Reception function is turned OFF manually, the clock will
not attempt any reception of the radio-controlled time (DCF time) as
long as the Time Reception OFF function is activated. The Time
Reception icon and the DCF icon will not be displayed on the LCD.
12/24 HOUR TIME DISPLAY SETTING
1. “12hr” or “24hr” flashes in the LCD. (default 24hr)
2. Press the key to select the “12hr” or “24hr” display mode. +
3. Confirm with the key and enter the . SET Manual time setting
Note:
When 24h time display is selected, the calendar format will be date
and month display. When 12h time display is selected, the calendar
format will be month and date display.
MANUAL TIME SETTING
In case the air quality monitor is not able to detect the radio-controlled
time (DCF time) signal (disturbances, transmitting distance, etc.), the
time can be manually set. The clock will then work as a normal Quartz
clock.
To set the clock:
1. The hour digits start flashing in the time display section.
2. Use the key to adjust the hours and then press key to go + SET
to the minute setting.
3. The minute will be flashing. Press the key to just the minutes. +
4. Confirm with the key and enter the . SET Calendar setting
Note:
The unit will still try to receive the signal despite a manual setting.
When the signal is received, the manually set time will automatically
be replaced by the received time. During reception attempts, the DCF
tower icon will flash. If reception has been unsuccessful, the DCF
tower icon will not appear but reception will still be attempted.
CALENDAR SETTING
The date default of the air quality monitor is 1. 1. of the year 2013
after initial set-up. Once the radio-controlled time signals are received,
the date is automatically updated. However, if the signals are not
received, the date can also be set manually. To do this:
1. The year starts flashing. Use the key, set the year required. +
The range runs from 2013 to 2049 (default is 2013).
2. Press the key to enter the month setting. SET
3. The month digit will be flashing. Press the key to set the +
month.
4. Press the T key to enter the date setting. SE
5. The date digit will be flashing. Press the key to set the date. +
6. Confirm with the key and enter the . SET Snooze setting
SNOOZE SETTING
The snooze time can be set OFF or to a maximum time of 30 minutes
(default is 10 minutes):
1. The snooze time (in minute) digit will be flashing. Use the key +
to set the snooze time (in minute). Each pressing of the button
will increase the snooze time by 5 minutes (5, 10…30 min).
The snooze can also be set OFF when the “OFF” digit is being
displayed.
2. Confirm with the button and enter the SET ºC/ºF temperature
unit setting.
Note:
If the snooze time has been set “OFF”, the snooze function will not be
activated.
°C/°F TEMPERATURE UNIT SETTING
The default temperature reading is set to °C (degre e Celsius). To
select °F (degree Fahrenheit):
1. The “°C” will be flashing, use the key to toggle between “°C” +
and “°F”.
2. Confirm with the key and enter the SET Air quality alert
setting.
AIR QUALITY ALERT SETTING
The air quality monitor has 3 alert settings (default: ALL):
Function keys
LCD display
Function key
Battery
compartment
SET key
ALARM key
+ key MODE key
SNOOZE key
Flashing
Time
Low battery icon
Indoor temperature
in ºC/ºF
Alarm time /
Equivalent CO
2
ppm / seconds
display
Indoor relative
humidity % RH
Alarm icon
DCF Tower icon (for time reception)
Flashing
Flashing
Flashing
Flashing
Air quality indicator
Flashing
Specyfikacje produktu
| Marka: | Technoline |
| Kategoria: | Radiobudzik |
| Model: | WL 1000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Technoline WL 1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Radiobudzik Technoline
29 Września 2024
26 Września 2024
26 Września 2024
19 Września 2024
17 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
Instrukcje Radiobudzik
- Enhance
- IHome
- Soundmaster
- JGC
- Essentiel B
- Beurer
- Elro
- Audiovox
- GoGen
- Salora
- Ditalio
- Nikkei
- Lanaform
- Sangean
- Nedis
Najnowsze instrukcje dla Radiobudzik
15 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024