Instrukcja obsługi TP-Link Omada Pro S4500-8GP2F
TP-Link
przełącznik
Omada Pro S4500-8GP2F
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link Omada Pro S4500-8GP2F (6 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.8 gwiazdek
Strona 1/6
© 2023 TP-Link 7106510430 REV1.0.0
Omada Pro Gigabit Smart Switch
1. To access the management page of the switch, open a browser and type
the switch’s IP address in the address eld, then press the Enter key.
If the switch obtains IP address from the DHCP server (typically a router), nd
the switch’s IP address on the DHCP server.
If not, use the default IP address to launch the switch’s 192.168.0.1
management page.
Note: Make sure the switch and computer are in the same subnet.
2. admin Enter for both the username and password in the lower case letters
to log in. The rst time you log in, change the password to better protect
your network and devices.
3. After a successful login, the main page will appear. You can click the menus
on the top side and left side to congure the corresponding functions.
Installation Guide
Conguration
LED Explanation
For the detailed congurations, refer to the User Guide and CLI Guide. The
guides can be found on the download center of our ocial website:
https://www.tp-link.com/support/download/.
Method 1: Standalone Mode
Switch PC
In Standalone Mode, use a computer to congure and manage the switch.
The switch supports two conguration methods:
Standalone Mode: Congure and manage the switch singly.
Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our
ocial website: https://www.tp-link.com/support/download/.
Note:
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.
3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as
a result of client limitations and environmental factors.
For simplicity, we will take S4500-8GP2F for example throughout the Guide.
Note:
1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which
complies with LPS or PS2 standard and 802.3af/at standard.
2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will
supply power instead.
Ethernet Ports (1–8)
AC Power Cord
DC Power Adapter
Internet
PC
PSE
LED S Explanationtatus
P erow
On Power on
S temys
F F Systlashing lashing: em running normally
Link/Act
(port 1–8)
On (Green) Running at 1000 Mbps
On (Yell w) Running at 10/100 Mbpso
F Transmitting/receiving datalashing
No connected device
SPF1/SFP2
(For S4500-
8GP2F)
On (Green) Running at 1000 Mbps
On (Yell w) Running at 100 Mbpso
F Transmitting/receiving datalashing
No connected device
PoE Status
(For Port 1-4 of
S4500-8GP/Port
1-8 of S4500-
8GP2F)
On Providing PoE power
Flashing
Current-ov rt-cir t/Connected erload/Sho cui
to a non-standard PD/Power exceeded the
Not providing PoE Power
PoE MAX
(For S4500-8GP/
S4500-8GP2F)
On Remaining power supply ≤ 7W
Flashing Remaining pow k for er supply eeps ≤ 7 W
mor tese than 2 minu
Remaining power supply
> 7W
Connection for PoE Switch
Ethernet Ports (1–8)
PC IP Camera AP IP Phone
PoE Devices
DC Power Adapter
AC Power Cord
Internet
SFP Slots
Connection for Non-PoE Switch
For simplicity, we will take S4500-8G for example throughout the Guide.
Specyfikacje produktu
| Marka: | TP-Link |
| Kategoria: | przełącznik |
| Model: | Omada Pro S4500-8GP2F |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z TP-Link Omada Pro S4500-8GP2F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje przełącznik TP-Link
2 Stycznia 2025
10 Grudnia 2024
9 Października 2024
7 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
2 Października 2024
2 Października 2024
Instrukcje przełącznik
- Seuthe
- Lindy
- Emerson
- Monacor
- Buffalo
- Edimax
- SEADA
- PAC
- Lancom
- Hama
- Sylvania
- Vacmaster
- Honeywell
- Heitronic
- Provision ISR
Najnowsze instrukcje dla przełącznik
9 Kwietnia 2025
9 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025