Instrukcja obsługi Uni-T UT225A
Uni-T
Sprzęt pomiarowy
UT225A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Uni-T UT225A (11 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/11
P/N:110401111865X
UT225A
UT225A
UT225A
Transformer Turns Ratio Receiver
Flex Clamp Sensor
Low Voltage Transformer Turns Ratio Tester
1
Contents
I. Introduction .............................................................................................................................. 2
II. Model ....................................................................................................................................... 2
III. Product Structure ...................................................................................................................... 2
IV. Working Principle ..................................................................................................................... 3
V. Standard Condition .................................................................................................................. 4
VI. Technical Parameters .............................................................................................................. 5
VII. Application ................................................................................................................................ 6
1. Power On/Off ..................................................................................................................... 6
2. Setting of Transformer Turns Ratio and Ratio Difference ................................................. 6
3. Testing of Transformer Turns Ratio .................................................................................. 6
4. Data Lock/Storage/Unlock ................................................................................................. 7
5. Data Viewing/Deletion ....................................................................................................... 9
6. Battery Replacement ......................................................................................................... 9
VIII. Precautions
............................................................................................................... 9
IX. Packing List .............................................................................................................. 10
2
I. Introduction
UT225A Low Voltage Transformer Turns Ratio Tester is extensively applied to
380/220V power system. It can be used to perform fast on-site detection on the
current transformer of metering device, and to measure current and leakage
current in 380/220V power system. Without the need to shut down the power, the
tester enables accurate testing on the actual transformer ratio, phase type and
polarity of current trans
former during operation.
UT225A consists of tester, primary current transformer (CT1) and secondary
current transformer (CT2). With small clamp diameter at 8mm, UT225A is suitable
to use in narrow space and environments with concentrated cables, making it a
safe, accurate and portable measurement meter for technicians. The application
of the tester can create significant economic and social benefits for power
enterp
rises to manage the use of power.
The primary current transformer (CT1) sends testing data via wireless transmission,
with transmission distance of 100 meter.
II. Model
Model
Primary
current
transformer
(CT1)
Secondary
current
transformer
(CT2)
Transformer
turns ratio
Angle
difference
Connection
mode of
primary
current clamp
and tester
UT225A
0.0A~3000A
0.00mA~5A
1~500
--
Wireless
transmission
III. Product Structure
UT225A consists of tester, primary current transformer (CT1) and secondary
current transformer (CT2). The primary current transformer (CT1) sends testing
data via wireless transmission, with transmission distance of 100 meter.
Specyfikacje produktu
| Marka: | Uni-T |
| Kategoria: | Sprzęt pomiarowy |
| Model: | UT225A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Uni-T UT225A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sprzęt pomiarowy Uni-T
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
Instrukcje Sprzęt pomiarowy
- Nedis
- Trotec
- Mitutoyo
- Flex
- Midland
- Ridgid
- Gossen Metrawatt
- TDE Instruments
- Techno Line
- Sanwa
- P3 International
- AkYtec
- Blebox
- Metrel
- Voltcraft
Najnowsze instrukcje dla Sprzęt pomiarowy
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025