Instrukcja obsługi Waves Renaissance DeEsser
Waves
oprogramowanie audio
Renaissance DeEsser
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Waves Renaissance DeEsser (22 stron) w kategorii oprogramowanie audio. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 14 użytkowników na średnio 4.6 gwiazdek
Strona 1/22

Renaissance DeEsser
User Guide

Renaissance DeEsser / User Guide
2
Introduction
What is a DeEsser?
A de-esser is an audio processor designed to attenuate high frequency ess sounds. These sibilant sounds often
create high-energy peaks at certain frequencies. Most such sounds (for example, S or Th or Sh sounds) are created
in the front of the mouth by the tongue and teeth, and can result in a shrill, whistling sound that causes unwanted
distortion or extreme presence in the higher frequencies.
A de-esser is a compressor that uses a sidechain filter to detect the energy in the high frequencies, rather than the
wideband energy of the whole spectrum. This way, compression is applied only when the energy in the EQ-focused
sidechain exceeds a certain threshold.
WHAT’S SPECIAL ABOUT THE RENAISSANCE DEESSER?
The Renaissance DeEsser combines the technologies
used in Waves C4, Renaissance VOX, and Waves
DeEsser with proprietary features that make it cleaner
and more effective.
Phase-Compensated Crossover helps to avoid undesirable coloration and phase modulation that would otherwise
occur as artifacts of the amplitude modulation applied by the compressor.

Renaissance DeEsser / User Guide
3
Adaptive threshold dynamically adjusts the threshold to the input signal, as opposed to typical “absolute value”
threshold processors. This yields more natural-sounding results.
Attenuation Range Control adapts to the input signal in order to provide a more unified de-essing effect.
Enhanced Visual Feedback lets you accurately see what you hear. This visual feedback is important, since the
Renaissance DeEsser works on a designated part of the spectral range of the input rather than the entire frequency
spectrum.
OTHER USES
Renaissance DeEsser can be used to control the level of any high-frequency sound, not just the esses in human
voices. It’s useful whenever you need to attenuate short-term, frequency-specific sounds. Renaissance DeEsser is
useful for tracking, mastering, live performances, and on-air situations.
• Use the de-esser for mastering rock music to calm down a hi hat that’s gotten too loud. This way, you can
tame the worst of the hi hat without losing it altogether in the mix.
• You want to shine up a vocal with some HF enhancement, but this results in high-frequency harshness. Use
Renaissance De-esser to control the vocal while keeping the bright sound.
• A sportscaster is spitting into your condenser mic. Use the de-esser to remove much of the high frequency
distortion.
Specyfikacje produktu
Marka: | Waves |
Kategoria: | oprogramowanie audio |
Model: | Renaissance DeEsser |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Waves Renaissance DeEsser, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje oprogramowanie audio Waves
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
Instrukcje oprogramowanie audio
- Steinberg
- MAAT
- Playfair Audio
- Antares
- Sonible
- PreSonus
- Audified
- CEDAR
- Sound Particles
- Tek'it Audio
- Best Service
- SONORIS
- Audio Modeling
- PSP Audioware
- Audiomodern
Najnowsze instrukcje dla oprogramowanie audio
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025
12 Marca 2025
25 Lutego 2025
22 Lutego 2025
21 Lutego 2025