Instrukcja obsługi Wechsel Voyager

Wechsel namiot Voyager

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Wechsel Voyager (2 stron) w kategorii namiot. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.7 gwiazdek

Strona 1/2
VOYAGER
Das Zelt auf einer ebenen Fläche
ausbreiten.
Spread out the tent on a flat
surface.
ACHTUNG: Die Segmente müssen
komplett ineinander geschoben
sein. ATTENTION: Segments have
to be inserted completely.
Die Clips am Gestänge befes-
tigen. Über die Justierung für
gleichmäßige Spannung sorgen.
Die Sturmabspannung stabilisiert
das Zelt bei starkem Wind.
Connect the hooks to the poles.
Use the adjustment to ensure
even tension. Secure the tent
with the guy lines and tent pegs.
Die gleichfarbigen Gestänge-
enden am Doppelösen-Gurtband
xieren.
Fasten the pole ends of the
same color to the double eyelet
webbing.
Farbig kodierte Stangen in die
Kanäle mit gleichfarbiger Ken-
nung einführen. Stangen immer
schieben, nie ziehen!
Lead the coloured pole in the
corresponding pole sleeve on the
flysheet. Always push the poles,
never pull!
APEX-Lüer önen und mit
Abstandhalter am Klettband
xieren.
Keep the APEX vents open by
setting up the bracer.
Die beiden Gurtbänder, zunächst
an der hinteren dann an der
vorderen Seite, mit Heringen
xieren. Dabei stellt sich das
Zelt auf.
Stake out the back and front end
of the tent by putting the pegs
through the webbing loops. The
tent stands up.
Die Gesngeenden in den Ösen
xieren.
Place the tips of the poles into the
eyelets.
Die Spannung des Innenzelt-
bodens lässt sich variieren.
The tension of the inner tent floor
can be varied.
AUFBAU
PITCHING THE TENT
7
4
1
8
5
2
6
3


Specyfikacje produktu

Marka: Wechsel
Kategoria: namiot
Model: Voyager

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Wechsel Voyager, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą