Instrukcja obsługi Zempire Condo

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zempire Condo (4 stron) w kategorii namiot. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7 użytkowników na średnio 4.0 gwiazdek

PITCHING INSTRUCTIONS - CONDOairflowseries

1.Clear your site making sure there are no

sharp objects where you are going to

pitch your tent. Try to get a site that is

as flat as possible.

2.Assemble the 6 pole sections.

Ensure that the poles are inserted

fully in tho the steel connectors.

4.Thread the RED poles through

the pole sleeves that run diagonally

across the centre of the tent. Tension

the poles inserting the pins located

directly underneath each pole

sleeve into the ends of the poles. It

may be easier to have someone to

support the crossover of the poles

during this step.

3.Firstly peg our the 4 corners of

the centre of the tent( ). Then peg

out each corner of the bedrooms( ).

Try to get the floor sitting as flat as

possible at each stage.

5.Thread the YELLOW poles through

the pole sleeves on either side of the

centre dome. Insert the pins into the

pole ends.

6.Thread the BLUE poles through

the pole sleeves at the front and

rear of the tent. Insert the pins into

the pole ends.

7.Peg out all remaining peg points

around the tent.

8.Pull the fly over the tent

and velcro the edges of the cover

onto the Velcro strips located on

each of the black pole sleeves. Attach

the hooks onto the loops sewn

around the pole sleeves.

10.Peg out all the guy ropes. Try to have

guy ropes at a 45oangle to the ground.

2x

2x

2x

9.Peg out the ORANGE

Webbing anchors attached

to fins above each side

window. Peg out at a 45o

angle to the ground and

tension.

Specyfikacje produktu