Instrukcja obsługi Zempire Neo 8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zempire Neo 8 (4 stron) w kategorii namiot. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 6 użytkowników na średnio 4.1 gwiazdek

PITCHING INSTRUCTIONS - NEO 8

6.Peg out all the peg points around the

inner tent. The peg points at the base of

each pole should be pegged through the

webbing loop rather than the ring.

2x

1x

4.Thread the BLUE pole through the front

and the pole through the rear GREEN

pole sleeve on either side of the dome

you have just created. Insert the pole

ends into rings. Clip the C clips around the

poles.

8. Attach the elastic loop over

the existing inner pegs. Where

there is no existing peg, peg the

fly directly into the ground

ensuring there is significant space

between the inner and fly.

9. It is recommended that guy

ropes are pegged out at all

times and windows are opened

whenever possible to allow

adequate ventilation.

Insert pegs at a 45o angle

3. Thread the RED poles

through the pole sleeves that

run diagonally across the

centre of the tent. Insert the

ends of the poles into the pins

located below each pole

sleeve. Clip the C clips around

the poles.

1.Clear your site making sure there are no

sharp objects where you are going to

pitch your tent. Try to get a site that is as

flat as possible. Spread out the inner tent

(White), the large door is located at the

front.

2. Assemble the 5 pole sections.

Ensure that the poles do not

snap together.

1x

7.Pull the fly over the inner tent. The

ORANGE webbing loops indicate the

front of the fly. Connect the velcro

loops inside the fly around the cut outs

on the corresponding pole sleeve.

5.Thread the YELLOWpole

through the pole sleeve at the

rear of the tent. Insert the pole

ends into rings. Clip the C clips

around the poles.

1x

NEO

8

NEO

8

Specyfikacje produktu