Instrukcja obsługi ZTE AC30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZTE AC30 (2 stron) w kategorii telefon komórkowy. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 9 użytkowników na średnio 4.1 gwiazdek

IndicatorStatusDescription

Battery

indication

RED glitteringPlease charge

RED brightVoltage of battery is low

Green glitteringCharging

Green brightVoltage of battery is high

LED offNo battery.

Signal

strength

indication

Red brightERROR or NO signal or NO

network service or NO SIM

GREEN glitteringSignal is ok

Green brightSignal is good

LED offLow power mode

Wi-Fi

indication

LED off WIFI is inactive or low power

mode

BLUE brightWPS is active

Blue brightWi-Fi is active

Network

indication

RED glittering2G Modem data transferring

RED brightRegister on 2G network

GREEN glittering3G Modem data transferring

GREEN brightRegister on 3G network

LED offERROR or NO signal or NO

network service or NO SIM

Notes:

* The battery LED will be GREEN bright once the battery is fully

charged when power on.

* The battery LED will be turn off once the battery is fully charged

when power off.

1

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057 Tel: +86-755-26779999

URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn

ZTE AC30

Quick Start Guide

2456738

LEGAL INFORMATION

Copyright © 2011 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical,

including photocopying and microfilm, without the prior written

permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to

make modications on print errors or update specications without prior

notice.

Version No.: R1.0

Edition Time: July-2011

Manual No.: 079584503492

9

Introduction

ZTE AC30 is a 3G/2G mobile hotspot device, working in CDMA/1X/

EVDO network. The client devices could connect to it via USB or Wi-Fi

interface. The device supports data and SMS services, enabling you to

communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started

with the product. For information about connection of services, please

consult your service provider.

Specication

Data ServiceCDMA EVDO: DL 3.1 Mbps

UL 1.8 Mbps

Weight80 g

Dimensions (W×H×D):99.7 mm*53.7 mm*13.9 mm

Power Adapter+5V (DC), 0.7 A Max

Battery1500 mAh

*Standby time100 hours

*Working time4 hours

Operate systemWindows 7, Windows Vista, Windows XP (SP2 or

later), MAC 10.4 or later

Web Browser Windows 7, Windows Vista (64bit or 32bit),

Windows XP (SP2 and later), MAC (10.4 later)

Notes:

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Switching On/Off Your Device

Press and hold the Power Key for three seconds to switch the device

on or off.

When you turn the device on, the signal icon is lit.

Charging Your Device

Notes:

• Charge at least 5 hours to ensure a full initial charge.

• Charging is only possible within a temperature range of 0°C to 45°C.

1. Connect the Mini USB end of the AC wall charger to the Mini USB

port on the device.

2. Plug the other end of the AC wall charger into the appropriate

electrical outlet.

Working Mode

Your device supports three working modes. For the client, we only use

PC or laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Mixed Mode: Connect to the device with the above two connection

methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure

that the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices

can surf on the Internet at the same time.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for

your reference. The actual device may be different.

Interface and Buttons

1. Power Hold the Power button to switch on/off the

device

2. IndicatorIt indicates your device’s status.

3. Charger/USB port

• Charge your device

• Connect the client to your device via USB

cable

Notes:

* Continuously press the Power buttonve times within 5 seconds,

the device will restart automatically and restore to the factory

default settings.

LED Indicator

It indicates the status of your device.

Hardware Installation

Inserting (U)SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert (U)SIM Card into the slot.

Warning:

Please power off the device and remove the external power adapter

before removing or inserting the (U)SIM card, if not, the device or (U)SIM

card may be damaged.

3. Insert the battery as shown with the contacts located against the

gold springs.

4. Press the battery down ush into the case.

5. Once the battery is secure, place the battery cover back on the

device until it locks into place.

Establishing a Connection Between Your Device and the Client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Power on your device.

3. Follow the system prompts to complete the software installation:

Notes:

• If the system does not launch installation automatically, you can run

the installation program in path of My Computer > Mobile Hotspot

> AutoRun.exe.

• The driver of your device will be installed at the same time.

4. After the installation, the system will create a shortcut icon on

your desktop and a program group in the Mobile HotspotStart

> Programsmenu. The connection between your device and the

client will be established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize,

and then Wi-Fi LED is blinking.

2. Use your normal Wi-Fi application on the client to search the

available wireless network.

Notes:

You need to check your Wireless

Network Connection. Set the

client to obtain an IP address

automatically in the Internet

protocol (TCP/IP) properties, and

the client will get an IP address

like “192.168.0.100”.

3. Select the SSID of your

device, and then click

Connect.

Specyfikacje produktu