Instrukcja obsługi ZTE MF51
ZTE
telefon komórkowy
MF51
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZTE MF51 (3 stron) w kategorii telefon komórkowy. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/3
ZTE MF51
Quick Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: +86-755-26779999
URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2012 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in
any form or by any means, electronic or mechanical, including photocopying and
microlm, without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make
modications on print errors or update specications without prior notice.
Version No. : R1.0
Edition Time: 2012-01
Manual No: 079584504098
Introduction
ZTE MF51 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA
network. It provides Internet connection via USB or Wi-Fi to clients, enabling you to
communicate anytime and anywhere.
Specication
Data Service
HSPA:
DL 14.4 Mbps
UL 5.76 Mbps
WCDMA CS: UL 64 kbps/DL 64kbps
WCDMA PS: UL 384 kbps/DL 384kbps
Interface USB and Wi-Fi
Wi-Fi Standard 802.11b/g/n
Wi-Fi Security WEP/WPA/WPA2
USB Version USB 2.0 HIGH SPEED
USB Interface Type Micro USB
Weight 80 g
Dimensions (W×H×D): 102.5 mm*51 mm*13.5 mm
microSD card Support up to 32 GB microSD card
Battery 1500mAh Li-ion battery
*Standby time 100 hours
*Working time 4 hours
Charge time 3 hours
Operate system Windows 7, Windows Vista, Windows XP (SP2 or later),
Mac OS (10.5 or later)
Web Browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or
later), Safari (4.0 or later), Chrome (10.0 or later)
Working temperature -10 °C ~ +60°C
Storage temperature -20 °C ~ +70 °C
Charging temperature 0 °C ~ +40 °C
Humidity 5%~ 95%
Notes:
microSD is a trademark of SD Card Association.
The device’s standby and working time are only for your reference, and based on
ideal working environment.
Getting to Know Your Device
The following figure shows the appearance of the device. It is only for your
reference. The actual device may be different.
Interface and Buttons
1. WPS
This button is used to start Wi-Fi Protected Setup authentication
process and enable/disable the Wi-Fi function.
• Hold it for about ve seconds to activate the WPS process.
• Hold it for about two seconds to enable/disable Wi-Fi function.
2. Charger/
USB port
• Charge your device.
• Connect the client to your device via USB cable.
3. Power Hold the button to switch on/off the device.Power
4. Indicators Indicates the status of your device.
Notes:
• Press and buttons simultaneously, and hold on about three WPS Power
seconds until all LEDs are off, then release the buttons, the device will restart
automatically and restore to the factory default settings.
Indicators
When the device is powered on, the following icons will light, with the corresponding
indications listed in the table below:
Indicators Status Description
Battery
Indication
RED glittering Please charge.
RED bright The voltage of battery is low.
GREEN bright
The voltage of battery is high.
Fully charged when power on or standby mode
with USB cable.
GREEN glittering Charging when power on or power off or standby
mode.
LED off
Under power off mode full charged with USB
cable or no charging
No charging or fully charged under standby
mode without USB cable
No battery
Wi-Fi
Indication
BLUE glittering Wi-Fi is active.
BLUE bright WPS is active.
LED off Wi-Fi is inactive or standby mode.
Network
Indication
BLUE glittering 2G Modem data transferring.
BLUE bright Register on 2G network.
GREEN glittering 3G Modem data transferring.
GREEN bright Register on 3G network.
RED bright ERROR or NO network service or No SIM
LED off Standby mode.
Hardware Installation
Inserting SIM Card, Memory Card and Battery
1. Use the thumb catch on the device to open the battery cover.
2. Insert SIM Card into the slot.
Warning:
Please power off the device and remove the external power adapter before
removing or inserting the SIM card, if not, the device or SIM card may be damaged.
3. Insert the memory card into the memory card holder.
4. Insert the battery as shown with the contacts located against the gold springs.
5. Line the battery cover up correctly and press gently to close the case.
Switching On/Off Your Device
Press and hold the button to switch on/off the device. Power
Notes:
Please install battery before power on.
Charging Your Device
1. Insert the charger lead carefully with the correct orientation to the charger port.
The plug only ts one way. Do not use excessive force to insert the plug.
2. Connect the charger to a main socket.
3. Disconnect when the battery is fully charged.
Working Mode
Your device supports three working modes. For the client, we only use PC or laptop
as the example in this document.
USB Mode: Connect the device to your PC or laptop via the included USB cable,
then power on your device. And the following picture is one application example:
Wi-Fi Mode: Power on directly, and then connect the device to your PC or laptop
via Wi-Fi. And the following picture is one application example:
Mixed Mode: Connect to the device with the above two connection methods.
The following picture is the application example. All of the client devices can surf on
the Internet at the same time.
1 2 4 5 6 73 8 9
Establish a connection between your device and
the client
Via USB Cable
1. Connect your device and the client with the USB cable.
2. Install software.
After the installation, the connection between your device and the client will be
established successfully a moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-
Fi status icon will light.
2. If the Wi-Fi status shown is blue bright or LED off, hold the WPS key for about
2 seconds to enable the Wi-Fi function.
3. Use your normal Wi-Fi application on the client to search the available wireless
network.
Notes: You need to check your Wireless Network Connection. Set the client to
obtain an IP address automatically in the Internet protocol (TCP/IP) properties,
and the client will get an IP address like”192.168.0.101”.
4. Select the SSID of your device, and then click .Connect
Specyfikacje produktu
| Marka: | ZTE |
| Kategoria: | telefon komórkowy |
| Model: | MF51 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ZTE MF51, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje telefon komórkowy ZTE
1 Kwietnia 2025
1 Kwietnia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
29 Września 2024
29 Września 2024
29 Września 2024
16 Września 2024
Instrukcje telefon komórkowy
- MaxCom
- Denver
- Emporia
- Energy Sistem
- Bea-fon
- Blaupunkt
- Nokia
- Alecto
- Plum
- Hummer
- Kazam
- AEG
- Asus
- Allview
- Casio
Najnowsze instrukcje dla telefon komórkowy
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025