Instrukcja obsługi Acer EK241QK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer EK241QK (2 stron) w kategorii monitor. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7 użytkowników na średnio 4.0 gwiazdek

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the adapter available in your

location.

• Turn off the LCD monitor and unplug the adapter.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

..EESSAACC RROO NNEEEERRCCSS EEHHTT OOTTNNOO YYLLTTCCEERRIIDD DDIIUUQQIILL YYNNAA RRUUOOPP RROO YYAARRPPSS RREEVVEENN•

..EESSAACC RROO NNEEEERRCCSS YYAALLPPSSIIDD DDCCLL EEHHTT NNOO SSRREENNAAEELLCC DDEESSAABB--LLOOHHOOCCLLAA RROO AAIINNOOMMMMAA YYNNAA EESSUU TTOONN OODD EESSAAEELLPP •

•will not be liable for damage resulting f

Acer rom use of any ammonia or alcohol-based eaners.cl

2. Do not place the LCD monitorear a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. n

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician shod perform servicinulg of any

nature.

5. Store the LCD monitor in a room with a temperature of -20 60° C (-4° to140° F). Storing the LCD monitor outside this ran° toge

may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• - Monitor tC signal cable is frayed or damaged. o-P

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

A

Package contents

ttaching the monitor to the bas

HDMI DC-19V

DPAudio Out

e

1.Remove the monitor, stand and base from the packaging.

2.Assemble the stand with base, rotating the stand in an anticlockwise direction. A clicking sound signifies that the

stand has been securely attached to the base.

3.Assemble the monitor with the stand and base. A clicking sound signifies that the monitor has been securely

attached to the base.

Connecting Your Monitor to a Computer

Turns the monitor on/off.

Blue indicates power on. Orange indicates standby/power

saving mode.

External Controls

No. IconItemDescription

1Mode/Exit

2Brightness/

Enter

Input/-

3

4 Menu/+

5POWERPower button

LCD monitorQuick start guideDP cableHDMI cable

(Optional)(Optional) AC Power cordAC Adapter

1. Turn off your monitor and unplug your computer’s power cord.

2. 2-1Connect HDMI Cable (nly HDMI-input model)O

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the HDMI cable to the computer.

2-2Connect DP Cable (Only DP-input model)

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the DP cable to the computer.

3. Connect the Audio Cable. (Only Audio-out Model) (Optional)

4. Insert the monitor power cable into the power port at the back of the monitor.

5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

/

/

/

/

a. Press to view Main page. Press again to enter mode select

function.

b. When the Function Menu is active. Press to return previous

Menu or exit current Menu.

a. Press to view Main page. Press again to enter brightness

adjustment function.

b. When the Function Menu is active, this button will enter a

selection in the OSD.

a. Press to view Main page. Press again to enter Input select

function.

b. When the Function Menu is active, press this button selected

or move to the previous function.

a. Press to view Main page. Press again to enter next function

in the Function Menu.

b. When the Function Menu is active, press this key selected or

move to the next function.

12 3 45

LCD MonitorEK1 series-EK241QK

Specyfikacje produktu