Instrukcja obsługi Acer KA242YE
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer KA242YE (5 stron) w kategorii monitor. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.7 gwiazdek
Strona 1/5
USER GUIDE
LCD Monitor KA2 series/KA242Y
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI (optional) and/
or DP (optional) input socket of the monitor, and the HDMI
(optional) and/or DP (optional) output socket of the graphics
card on the computer. Then tighten the thumbscrews on the
signal cable connector.
3. Insert the monitor power cable into the power port at the
back of the monitor.
4. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync:
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical
content frame rates for power efficient, virtually stutter free and low-latency display update.
Specyfikacje produktu
| Marka: | Acer |
| Kategoria: | monitor |
| Model: | KA242YE |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Acer KA242YE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje monitor Acer
8 Kwietnia 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
2 Marca 2025
26 Lutego 2025
20 Lutego 2025
7 Lutego 2025
28 Stycznia 2025
Instrukcje monitor
- monitor LaCie
- monitor Atlona
- monitor Prowise
- monitor Promethean
- monitor ADS-TEC
- monitor JVC
- monitor Philips
- monitor ProDVX
- monitor Jensen
- monitor Chauvet
- monitor Soundstream
- monitor Planar
- monitor Cooler Master
- monitor Neets
- monitor Denver
Najnowsze instrukcje dla monitor
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025