Instrukcja obsługi Acer KA270HD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer KA270HD (3 stron) w kategorii monitor. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 8 użytkowników na średnio 4.9 gwiazdek

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any

nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this

range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the VGA (optional) and/or DVI-D

(optional) and/or HDMI (optional) input socket of the monitor, and

the VGA (optional) and/or DVI-D (optional) and/or HDMI (optional)

output socket of the graphics card on the computer. Then tighten the

thumbscrews on the signal cable connector.

3. Optional: Connect the audio input socket (AUDIO IN) of the LCD

monitor and the line-out port on the computer with the audio cable.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

2

Note: Audio output is only for audio output model. Please check user manual for more instruction.

12

External controls

1&2Power buttonTurns the monitor on/off. Blue indicates power on. Amber indicates standby/

power saving mode.

3&4</>Minus / PlusIf the OSD is active, press the or buttons to toggle between the OSD Minus Plus

options. If the OSD is inactive, press the or buttons to adjust the Minus Plus

volume. (Optional).

5MenuOSD functionsPress to view the OSD. Press again to enter a selection in the OSD.

6AutoAutoIf the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press

Autoand the monitor will automatically optimize the display position, focus, and

clock of your display.

7Empowering KeyPress this button to select scenario mode.

Specyfikacje produktu