Instrukcja obsługi Acer Predator CG48

Acer monitor Predator CG48

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer Predator CG48 (2 stron) w kategorii monitor. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.4 gwiazdek

Strona 1/2
English
Acer OLED Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the OLED monitor screen:
• Turn off the OLED monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the OLED monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the OLED screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the OLED monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the OLED monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the OLED monitor or the monitor is exposed to rain.
• The OLED monitor or case is damaged.
7. In order to prevent damage to the OLED panel, do not place the monitor face down on a surface.
Installing the Monitor Base
1. Place the monitor on a table, with screen facing down.
2. Align and install the monitor bases into the mounting slots on the bottom of the monitor.
3. Secure the monitor bases with the four screws.
4. Lift the monitor to an upright positon and place it on a table.
5. Remove the plastic bag around the monitor.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer’s power cord.
DP
USB Type A
USB
USB Type C
( )2.1
Google
TV rubber
HDMI 1
HDMI 2
HDMI 3
HDMI 3
(2.1)
DP
( )
2.0
( )
2.0
( )
2.0
( )
2.0
2. Connect the signal cable to the DP (optional) and/or HDMI
(optional) input socket of the monitor, and the DP (optional) and/
or HDMI (optional) output socket of the graphics card on the
computer.
3. Connect the USB Cable (Optional)
Connect the USB 3.0 cable to port.
4. Connect the Type C Cable (Optional)
Connect the Type C Cable to port for fast charge
5. Insert the monitor power cable into the power port at the back of
the monitor.
6. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync Premium (HDMI2.1/DP/Type-C)
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
Note:
• DP: 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.
• Type-C: 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.
• HDMI(2.0): 3840x2160 supports to 60Hz.
• HDMI(2.1): 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.
External controls
1
2
3
4
5


Specyfikacje produktu

Marka: Acer
Kategoria: monitor
Model: Predator CG48

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Acer Predator CG48, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą