Instrukcja obsługi Aguilar Filter Twin II
Aguilar
nieskategoryzowany
Filter Twin II
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aguilar Filter Twin II (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 14 użytkowników na średnio 5.0 gwiazdek
Strona 1/4
FILTER TWIN® Dual Envelope Filter
The Filter Twin uses two identical filters sweeping in opposite directions, one
up and one down. This unique design creates classic 70’s-inspired funk
sounds and completely new and original filter tones.
The Filter Twin employs an intuitive four-knob layout. The blend control pans
between the filters, allowing the user to mix how much of each filter they hear.
The threshold control determines how sensitive the unit is to different playing
styles, while the velocity controls determine the speed of each filter.
Features:
• Separate velocity controls for the each filter
• Blend control allows for panning between filters
• Gig-saver bypass (signal passes even if your battery dies)
• Power: Nine-volt battery or optional power supply
• Heavy duty steel construction
Owner’s Manual
Manual Version 1.2
I. Functions
A. Top Panel:
BLEND: Pans between the up and down filters. The “up” filter control is indicated by an
arrow pointed up. The “down” filter control is indicated by a down arrow.
THRESHOLD: Controls the sensitivity of the unit to different input levels
VELOCITY UP: Controls the speed of the up filter*
VELOCITY DOWN: Controls the speed of the down filter*
ENGAGE: Toggles between engage and bypass. The blue LED indicates that the effect is
engaged.
*The filter velocity also depends on threshold settings and input level. As the threshold is
lowered and your bass’ input level is increased, the filter velocity increases as well – so
tweak away and have fun!
B. Side Panel:
IN: ¼” input
DC IN: This is a standard 2.1mm DC jack. The center terminal polarity is negative.
Compatible with 9-10 VDC regulated power supplies.
OUT: ¼” output
C. Specifications:
Current consumption: ………………………..10mA
Input impedance: ............................................1MΩ (Effect On)
Output impedance: .........................................1 KΩ
Maximum Output: …….……………………..+6dBu (1.6VRMS)
Noise Level: .................................................…-94 dBu ‘A’ weighted *
External DC Power: ………………………..9-10 VDC center terminal negative
* = All knobs set to 12 o'clock
II. Sample Settings
Please visit our website, www.aguilaramp.com, for sample settings.
III. How to change the battery
This operation can be done quickly and easily with a standard, #2 Philips screw driver!
The battery is easily accessible by loosening the screw on the bottom of the unit.
The battery compartment will slide forward and you will be able to see the padded area to
insert the battery and attach the battery clips. Once the battery has been replaced, simply
slide the compartment back in and tighten the screw.
Specyfikacje produktu
| Marka: | Aguilar |
| Kategoria: | nieskategoryzowany |
| Model: | Filter Twin II |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Aguilar Filter Twin II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Aguilar
16 Września 2024
Instrukcje nieskategoryzowany
- Ditek
- ICC
- Handy
- Rotatrim
- Sonnenkönig
- Barazza
- Stihl
- Kidde
- Stanley
- Noveen
- ATen
- Haeger
- Goodis
- Joranalogue
- Mercury
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024