Instrukcja obsługi Aitech 06-080-008-01
Aitech
przedłużacz AV
06-080-008-01
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aitech 06-080-008-01 (4 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 13 użytkowników na średnio 4.3 gwiazdek
Strona 1/4
SMARTtv
1. All of the safety, set-up and operating instructions should be read before the
product is operated.
2. The safety and operating instructions should be retained for future reference.
3. All warnings on the product and in the operating instructions should be adhered to.
4. All operating and use instructions should be followed.
5. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Do not use attachments not recommended by the products manufacturer if they
may cause hazards.
7. Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub. Never spill liquid of any kind on this product.
8. Anymountingoftheproductshouldfollowthemanufacturer’sinstructionsand
should use a mounting accessory recommended by the manufacturer.
9. This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type or power supply to your home,
consult your product dealer or local Power Company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
10. Power supply cord should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them.
11. For added protection for this product during a lightning storm, or if it is left
unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the cable system. This will prevent damage to the product due to
lightning and power line surges.
12. Never push objects of any kind into this product through the openings as they
may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
13. Do not overload wall outlets with extension cords or integral convenience
receptacles as this can result in a risk of fire or electric shock.
14. Unplug this product from the wall outlet and refer servicing to qualified services
personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the products.
c. If the product does not operate normally by following the operation instructions,
adjust only those controls that are covered by the operating manual as an
improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore this product to its
normal operation.
d. If the products have been dropped or damaged in any way.
e. When the product exhibits a distinct change in performance -- this indicates a
need for service.
15. When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or that have the same
characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
16. Upon completion of any service or repair to this product, ask the service technician
to perform safety checks to determine that the product is in proper operating
condition.
17. The product should be situated from heat sources such as radiators, heat registers,
stoves, or other products including amplifiers that produce heat.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
Frequency: 2400MHz~2483MHz
Sender Power: 10dBm
Channels: 4 - 2414,2432,2450,2468MHz
Frequency Stability: +100KHz
Video Input Level: 1 Vp-p
Audio Input Level: 1 Vp-p
Supply Voltage: 9~12V, 700mA or up
Antenna: Flat antenna
Dimension: 5”Dx2”Wx7”5H
Operating Temperature: -10C~+60C
Frequency: 2400MHz~2483MHz
Sensitivity: -90dBm
Channels: 4 - 2414,2432,2450,2468MHz
L.O. Stability: +100KHz
Video Input Level: 1 Vp-p
Audio Input Level: 1 Vp-p
Supply Voltage: 9~12V, 300mA or up
Antenna: Flat antenna
Dimension: 5”Dx2”Wx7”5H
Operating Temperature: -10C~+60C
Congratulations on your purchase of the AITech Wireless Cable TVs System. This
product combines easy set-up, ease of use and convenience for your wireless
cable TVs viewing experience. Whether you need a TV in your kitchen, garage, back
porch or a room without a cable connection, the AITech Wireless Cable TVs system
will provide you with years of Wireless Cable TVs enjoyment.
For assistance using or connecting your AITech Wireless Cable TVs System, visit
http://www.aitech.com/troubleshooting. If you have an immediate need for assistance,
please call and ask for technical support at 408-991-9699.
For an easy and quick set-up of your new AITech product, follow the instructions on
the following pages.
We sincerely hope you enjoy your new AITech Wireless Cable TVs System.
1
Front view of
transmitter
Rear view of
transmitter
Power Adapter
Unpack your
equipment and
locate your
Power Adapters,
the Transmitter
and your RF
cables.
2
Place your transmitter to the closest cable drop to the remote TV.
(NOTE: If you plan to also connect your Digital Cable Box, you must locate the
transmitter close to your Digital Box.)
1. Connect your
incoming cable
to the “F” Type
connector on
the rear of the
transmitter marked
“Cable In.”
For Digital Box or
other video device
connection.
2. Connect the 12V power
adapter to your transmitter
and to your 110V wall outlet.
Analog cable TV
signal input
Front view
of Receiver
Rear view of
Receiver
3 3. Turn on the Transmitter by pressing
the power button at the bottom of the
transmitter.
Your
Transmitter
is
Now
Ready
4
Unpack your equipment and locate your
Receiver, Power Adapter and Cables.
Specyfikacje produktu
| Marka: | Aitech |
| Kategoria: | przedłużacz AV |
| Model: | 06-080-008-01 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Aitech 06-080-008-01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje przedłużacz AV Aitech
15 Sierpnia 2024
15 Sierpnia 2024
Instrukcje przedłużacz AV
- Approx
- Bogen
- Kramer
- SWIT
- Atlona
- Blustream
- Megasat
- StarTech.com
- Genexis
- AG Neovo
- Hama
- Schwaiger
- Nedis
- ConnectPro
- Marmitek
Najnowsze instrukcje dla przedłużacz AV
8 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
26 Lutego 2025
20 Lutego 2025
20 Lutego 2025
7 Lutego 2025