Instrukcja obs艂ugi AKAI ACRS-4000
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla AKAI ACRS-4000 (43 stron) w kategorii Ogl膮da膰. Ta instrukcja by艂a pomocna dla 11 os贸b i zosta艂a oceniona przez 6 u偶ytkownik贸w na 艣rednio 4.7 gwiazdek
Strona 1/43
BLUETOOTH CLOCK RADIO
ACRS-4000
INSTRUCTION MANUAL
EN - ENGLISH
CONTROL LOCATION
1. POWER
2. NEXT / F.F.
3. PREVIOUS / REWIND
4. TIME/PROGRAME/PLAY/PAUSE
5. TUNING + / 10+
6. TUNING - / 10-
7. ALARM
8. MODE
9. SLEEP/ SNOOZE
10. SPEAKER
11. VOLUME CONTROL
12. MICRO SD CARD SLOT
13. USB CONNECTOR
14. LED DISPLAY
15. DC 5V ADAPTOR PORT
16. WIRE ANTENNA
OPERATING INSTRUCTION
Introduction
Please read this manual carefully so you can have a better understanding of performance and features
of this clock radio.
AC Adaptor Operation
Insert one end of the AC/DC 5V adaptor to the adaptor port (Location 16) of the unit, and the other end
to the power supply. The unit will be automatically in standby mode when connecting to AC power.
Warning! Before using the unit, check if the local mains supply is compatible with the unit. Do not plug or
unplug the adaptor when your hands wet.
When the unit will not be used for long periods of time (e.g., vacation etc.) disconnect the adaptor from the wall
outlet.
Normal Operation
1. Press POWER to switch on the radio.
2. Press MODE once or more to select mode (Bluetooth / FM / USB / Card).
3. Adjust the sound with VOLUME button.
4. To switch to standby mode, press POWER once.
Setting Time
Auto update
After a short time under FM RDS radio signal, the current time will appear on the display.
Manual Setting
1. Check the radio if it is switched off or in standby mode.
2. Press and hold PROG for 3 seconds on the panel to start clock setting.
3. Press PREVIOUS or NEXT button for 12-hours/24-hours selection.
4. Press PROG to hour setting.
5. To set the hours, press PREVIOUS or NEXT while the display is still flashing.
6. Press PROG to minute setting.
7. To set the minutes, press PREVIOUS or NEXT while the display is still flashing.
8. Press PROG to complete the clock setting.
Setting The Alarm
1. Check the radio if it is switched off or in standby mode.
2. Press the ALARM once to preview the alarm time AL1 and AL2.
3. Press ALARM for 3 seconds to start alarm setting.
4. To set the hours, press PREVIOUS or NEXT while the display is still flashing.
5. Press ALARM to minute setting.
5. To set the minutes, press PREVIOUS or NEXT while the display is still flashing.
6. Press ALARM and press PREVIOUS or NEXT to select the alarm sound as Buzz (bb), Radio (rad)
or USB (usb).
7. Press ALARM and press PREVIOUS or NEXT to select the volume of alarm sound.
8. Press ALARM to complete the alarm setting.
Remark: When the alarm rings, the volume of the alarm will gradually increase. Press ALARM to stop
the ringing.
*During standby mode*
Press ALARM once: preview AL1.
Press ALARM twice: preview AL2.
Press ALARM three times: you will see two dots (:) in front of the time shown on the screen, which
indicates the alarm is switched on.
Press ALARM four times: the dots (:) no longer shown on the screen in front of the time, which
indicates the alarm is turned off.
Specyfikacje produktu
| Marka: | AKAI |
| Kategoria: | Ogl膮da膰 |
| Model: | ACRS-4000 |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z AKAI ACRS-4000, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje Ogl膮da膰 AKAI
3 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
2 Stycznia 2025
Instrukcje Ogl膮da膰
- Ogl膮da膰 Ticwatch
- Ogl膮da膰 Freestyle
- Ogl膮da膰 Sinn
- Ogl膮da膰 Bering
- Ogl膮da膰 Movado
- Ogl膮da膰 TCM
- Ogl膮da膰 Dugena
- Ogl膮da膰 WoodWatch
- Ogl膮da膰 Ikea
- Ogl膮da膰 Rado
- Ogl膮da膰 Lynx
- Ogl膮da膰 Eta
- Ogl膮da膰 Versace
- Ogl膮da膰 Tauchmeister
- Ogl膮da膰 Invicta
Najnowsze instrukcje dla Ogl膮da膰
30 Marca 2025
26 Marca 2025
26 Marca 2025
13 Marca 2025
13 Marca 2025
13 Marca 2025
13 Marca 2025
