Instrukcja obsługi American International SBK931GB


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American International SBK931GB (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
iSBK931GB
VEHICLE APPLICATION
Subaru
2018 Crosstrek
2017-18 Impreza
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
©2018 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 6/18 PRINT Ver. 6/18
SBK931GB Mounting Kit
DASH DISASSEMBLY INSTRUCTIONS
1. Using a soft tool carefully unsnap and remove the air vents on both sides of the radio.
2. Unsnap and remove the trim bezel above the factory radio.
3. From the radio mounting brackets Remove (4) Phillips screws securing the radio, remove.
4. Remove (4) panel clips from the OEM radio panel. Save for kit assembly.
23
DOUBLE DIN INSTALLATION INSTRUCTIONS
Figure A
KIT ASSEMBLY INSTRUCTIONS
Single ISO Mount Application
1. Reinstall the (4) panel clips left over for disassembly to the rear of the
SBK931GB main panel.
2. Insert pocket into lower section of the brackets.
3. Install brackets to rear of main frame using the (2) screws provided, hooking bottom of
 bracketstomainpanelrst
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
5. Using the main frame of the as a guide, slide radio forward or backward for desired
look and then tighten screws to the radio.
Double DIN ISO Mount Application
See Fig B for bracket tab removal.
1. Reinstall the (4) panel clips left over for disassembly to the rear of the SBK931GB
main panel.
2. Remove pocket support tabs from both brackets.
3. Install brackets to rear of main frame using the (2) screws provided, hooking bottom of
 bracketstomainpanelrst
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
5. Using the main frame of the as a guide, slide radio forward or backward for desired
look and then tighten screws to the radio.
Figure B Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)


Specyfikacje produktu

Marka: American International
Kategoria: Niesklasyfikowane
Model: SBK931GB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z American International SBK931GB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane American International

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025