Instrukcja obsługi AMX MSA-STMK-43

AMX nieskategoryzowany MSA-STMK-43

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX MSA-STMK-43 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/2

QUICK START GUIDE

MSA-STMK-43 Secure Table Mount Kit

MSA-STMK-43

The MSA-STMK-43 Secure Table Mount Kit (FG2265-18) is a beautifully styled plate

that, when attached to the Modero S MST-431 4.3” Tabletop Touch Panel (FG2265-06)

and secured with the under-table tamper-resistant bolts, will make it virtually theft-

proof (FIG. 1). If drilling into the table is not feasible, the secure mounting plate can be

attached to the touch panel (but not the table) and then secured with a Kensington ®

Lock. Both methods may be used simultaneously for extra security

Installation

The MSA-STMK-43 may be mounted in one of two ways: it can be affixed to a table or

other surface using the included hex head bolts and tamper-proof nuts, or it can be

allowed to move freely but constrained by a Kensington Lock cable. For additional

security, both options may be used at the same time.

NOTE: For the table mount installation, the tools necessary include a drill with a 1/4” bit,

a Phillips head screwdriver, and an adjustable-head box wrench. The Kensington Lock

installation requires use of a Phillips head screwdriver.

Table Mount Installation

To install the MSA-STMK-43 to a table or other surface:

1. Place the security mount base in the location where it is to be installed, taking

care not to put the mount base past the edge of the table.

2. Mark the location of the hex head bolt holes going through the security mount

base, such as by drilling through the holes into the table (FIG. 2). When drilling

through the holes, use a 1/4” drill bit to allow the bolts to pass through. Clean out

the drilling debris from the holes and from the surface of the table.

3. On the touch panel, turn the touch panel upside down and remove the 2 Phillips

head screws from the bottom of the device.

4. Install the hex head bolts through the security mount base (FIG. 2). Do NOT

secure the bolts in the table at this time.

5. Using the two Phillips flat head screws included in the kit, secure the security

mount base to the bottom of the touch panel from the underside of the base.

6. Pass the Hex Head Bolts through the table.

FIG. 1 MSA-STMK-43 SECURE TABLE MOUNT KIT

PRODUCT SPECIF ICATIONS

Dimensions (HWD): 0.43” x 5.03” x 3.06” (1.08 cm x 12.76 cm x 8.13 cm)

Weight: 0.60 lbs (0.27 kg)

Included Accessories: • Security Mount Base (62-2265-16)

• Kensington Lock Bracket (60-5968-50)

• Screw, 8-32 X .1.00, Torx Flat Head, Black (2) (80-5004)

• Screw, 6-32 X .375, Phillips Flat Head, Black (2)

( )80-5006

• Nut, 1/4-20, Tamper Proof (3) (80-5007)

• Washer, 1.5 Dia X .312 Thick , Nylon (2) (80-5008)

• Bolt, 1/4-20 X 3.00 Hex Head, Black (2) (80-5009)

• MSA-STMK-43 Quick Start Guide (93-2265-18)

Other AMX Equipment: • MST-431 4.3" Modero S Series Tabletop Touch Panel

(FG2265-06)

For more information on the MST-431 4.3" Modero S Series Tabletop Touch Panel, refer to

the MSD/T-431 Operation Reference Guide (available to view/download at www.amx.com).

Kensington

Lock Bracket

Front

3.06”

(8.13 cm)

5.03”

(12.76 cm)

Top

Oblique

FIG. 2 INSTALLATION PROCEDURE, EXPLODED DIAGRAM

Washers

Tamper-Proof Nuts

Table surface

MST-431

Security Mount Base

Hex Head Bolts

Phillips Flat Head Screws

Table-side nut

Outside nut

Specyfikacje produktu

Marka:	AMX
Kategoria:	nieskategoryzowany
Model:	MSA-STMK-43
Kolor produktu:	Czarny
Liczba obsługiwanych wyświetlaczy:	1
Typ mocowania:	Biurko
Kompatybilność:	MST-431 (FG2265-07)