Instrukcja obsługi AMX MXA-RMK-10

AMX nieskategoryzowany MXA-RMK-10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX MXA-RMK-10 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 3.5 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/2

QUICK START GUIDE

MXA-RMK-10 Rack Mount Kit for 10" Modero X Series Landscape Touch Panel

Overview

The MXA-RMK-10 Modero X Series® Rack Mount Kit (FG5969-62) is an optional accessory for

the MXD-1000 10.1” Modero X Series Wall/Flush Mount Touch Panel (FIG. 1). The kit allows

the touch panel to be mounted directly on an equipment rack, and includes a rack mount

frame, screws and washers.

Product Specif ications

Installation of the MXA-RMK-10

The MXA-RMK-10 offers a stable installation mount for the MXD-1000 through the panel’s

Back Box.

NOTE: The MXA-RMK-10 Rack Mount Kit may only be used with the landscape mount of the

MXD-1000 touch panel (FG5968-13). It cannot be used with the portrait mount of the

MXD-1000.

NOTE: All doors, covers, and other obstacles preventing installation of the Rack Mount Kit should

be removed before installation is attempted. Due to the size of the Modero X Series panel, it may

not be possible to close racks that contain a rack door, once installation is complete.

To install the MXA-RMK-10:

1. Secure the Rack Mount Panel to the rack with #10 screws. Make sure that the

installation flanges (FIG. 2 and FIG. 3) face away from the front of the rack (FIG. 1).

2. Insert the Back Box into the Rack Mount Panel, making sure that the Back Box is in the

correct orientation. The standoffs on the installation flanges will pass through the Back

Box and help anchor it in place.

3. Pass a washer through a #6 screw and insert it in a standoff screw hole (FIG. 2). Repeat

this procedure at each corner of the Back Box.

WARNING: The maximum recommended torque to be used on the Back Box installation

screws is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the screws, such

as with powered screwdrivers, can strip out the screw holes or damage the plastic back

box. .

4. With the Back Box anchored in the Rack Mount Panel (FIG. 4), you may now install the

MXD-1000 into the Back Box.

NOTE: For more information on installing the MXD-1000 into its back box, please refer to the

MXD/T-1000 Operation Reference Guide, available from www.amx.com.

FIG. 1 MXA-RMK-10

MXA-RMK-10 (FG5969-62) SPECIF ICATIONS

Dimensions

(HWD):

6.97” x 19.00” x 2.09” (17.70 cm x 48.26 cm x 5.31 cm)

Weight: 3.25 lbs (1.47 kg)

Included

Accessories:

• MXA-RMK-10 Installation Guide (93-5969-62)

• Rack Mount Panel, 10" Modero Wall Touch Panel (62-5968-44)

• Screws, #10-32 PFH 1.75" Long, Black (4) (80-5968-01)

• Screws, #6-32 x .375, PPH, Black (4) (80-0138)

• Washers, #6, Flat, 3/8 Diameter, .03 Thick, Stainless Steel (4) (80-0322-01)

Other AMX

Equipment:

• MXD-1000 10” Modero X Series Panoramic Wall Touch Panel, Landscape

Mount (FG5968-13)

19.00” (48.26 cm)

6.97”

(17.70 cm)

2.09”

(5.31 cm)

Front View

Top View

Side View

6.97”

(17.70 cm)

2.09”

(5.31 cm)

Installation

Flanges

Standoffs

FIG. 2 INSTALLATION OF THE BACK BOX INTO THE MXA-RMK-10, FRONT VIEW

FIG. 3 INSTALLATION OF THE BACK BOX INTO THE MXA-RMK-10, REAR VIEW

FIG. 4 FINAL ASSEMBLY OF THE MXA-RMK-10 WITH BACK BOX

Installation

Flange

Screws

Washers

Installation

Flange

Screws

Washers

Rack Mount Panel

Back Box

Specyfikacje produktu

Marka:	AMX
Kategoria:	nieskategoryzowany
Model:	MXA-RMK-10
Kolor produktu:	Czarny
Wysokość produktu:	177 mm
Szerokość produktu:	482.6 mm
Głębokość produktu:	53.1 mm
Waga produktu:	1470 g
Typ mocowania:	Ściana
Kompatybilność:	MXD-1001-L\r\nMXD-1000-L\r\nMXD-1000-L-NC