Instrukcja obsługi AMX MXT-2000XL-PAN-NC

AMX nieskategoryzowany MXT-2000XL-PAN-NC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX MXT-2000XL-PAN-NC (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/2

QUICK START GUIDE

MXT-2000XL-PAN 20.3" Modero X® Series Panoramic Tabletop Touch Panel

Overview

The MXT-2000XL-PAN 20.3" Modero X Series ® Panoramic Tabletop Touch Panel

(FG5968-01) features a beautiful, panoramic capacitive multi-touch screen that

provides users access to multiple applications with minimal navigation. It is

hardware-ready for support of Near Field Communication™ (NFC) Technology to

allow personalization of the user experience and productivity enhancing

capabilities through integration with NFC capable personal devices.

The distinctive, low-profile design is engineered to sit perfectly on a table without

obstructing views.

Product Specif ications

Connector Locations

Two Type A USB ports are located on the rear right corner of the device (FIG. 2).

USB peripherals (mouse, keyboard, etc.) may be connected to either of the two

USB ports on the rear of the device.

The power and Ethernet connectors, as well as an additional USB port are located

on the bottom of the device ( FIG. 3).

The underside USB port, as well as the two rear USB ports, may be used with a

flash drive for page transfers or firmware upgrades.

The MXT-2000XL-PAN does not have individual channels on the base of the

device to allow passage of cables from underneath the base. Instead, it has one

slot at the base to allow options on cable configuration, with channels for

securing power and Ethernet cables (FIG. 4).

Each channel side has slots for attaching tie-wraps to secure each cable. The

ferrite on the power cable must be secured with the included tie-wrap during

installation to prevent the possibility of the panel not sitting flush on the table.

Other cables may be secured with tie-wraps if desired, but this is not necessary.

Wiring Guidelines

The MXT-2000XL-PAN uses a 13.5V -compliant power supply to provide power

to the panel via the 2-pin 3.5 mm captive wire PWR connector.

The incoming PWR and GND wires from the power supply must be connected to

the corresponding locations within the PWR connector.

Note: Apply power to the panel only after installation is complete.

Note: Connecting power to the MXT-2000XL-PAN should be done using the

included 2-pin 3.5mm captive wire connector included with the device. This

connector is retained within its port with locking screws instead of the pins on each

side of standard captive wire connectors, and using force to insert a standard

captive wire connector may damage the device.

FIG. 1 MXT-2000XL-PAN

MXT-2000XL-PAN SPECIF ICATIONS

Dimensions (HWD) 9 3/16" x 20 3/8" x 5 7/8" (235mm x 519mm x 150mm)

Weight 12.3 lbs (5.58 Kg)

Power Consumption Full-On: 35 W (13.5V , 2.6A)

Standby: 7 W (13.5V , 0.52A)

External Power

Supply Required

Requires one of these AMX power sources (not included):

• PSR4.4 Power Supply, 4.5A, 3.5 mm Phoenix with Retention

Screws (FG423-46)

• PSN4.4 Power Supply, 4.5A, 3.5 mm Phoenix, 13.5V

(discontinued) (FG423-45)

• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)

• MXA-MP Modero X/S Series Multi Preview (FG5968-20)

Certifications • FCC Part 15 Class B

• C-Tick CISPR 22 Class B

• CE EN 55022 Class B and EN 55024

• CB Scheme IEC 60950-1

• IC

• IEC/EN-60950

• UL 60950-1

• RoHS/WEEE compliant

Environmental • Temperature (Operating): 32°F to 104°F (0°C to 40°C)

• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)

• Humidity (Operating): 20% to 85% RH

• Humidity (Storage): 5% to 85% RH

• Power ("Heat") Dissipation:

On: 119.4 BTU/hr

Standby: 23.9 BTU/hr

Included

Accessories

• Locking 2-pin Phoenix mate (41-0002-SA)

• MXA-USB-C, USB Port Cover Kit (FG5968-18)

• HPG-10-10K, 3/4" Mini-Grommet (FG570-01)

• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)

Sleep Button

USB Ports (2)

Sleep Button

Cable Slot

NFC Sensor

FIG. 2 MXT-2000XL-REAR VIEW

FIG. 3 MXT-2000XL-PAN UNDERSIDE CONNECTORS

FIG. 4 TIE-WRAP FOR POWER CONNECTOR FERRITE

Type A USB Ports

Sleep button

Speaker

Ethernet

Type A USB Port

10/100 Port

13.5V Power Port

Tie-wrap channels

Tie-wrap

Ferrite

Specyfikacje produktu

Marka:	AMX
Kategoria:	nieskategoryzowany
Model:	MXT-2000XL-PAN-NC
Typ wyświetlacza:	TFT
Wysokość produktu:	235 mm
Szerokość produktu:	519 mm
Głębokość produktu:	150 mm
Wbudowane głośniki:	Tak
Długość przekątnej ekranu:	20.3 "
Pojemność pamięci wewnętrznej:	4000 MB
Prędkość transferu danych przez Ethernet LAN:	10, 100 Mbit/s
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	20 - 85 %
Rozdzielczość:	1920 x 800 px
Wi-Fi:	Nie
Przewodowa sieć LAN:	Tak
Pobór mocy:	32 W
Zakres temperatur (przechowywanie):	-20 - 60 °C
Dopuszczalna wilgotność względna:	5 - 85 %
Technologia okablowania:	10/100Base-T(X)
Typ podświetlacza:	LED
Kąt widzenia (poziomy):	89 °
Kąt widzenia (pionowy):	89 °
Jasność:	250 cd/m²
Format obrazu:	12:5
Moc głośnika:	2 W
Ilość portów RJ-45:	1
Technologia touchscreen:	Pojemnościowa
Ilość portów USB 2.0 typu-A:	3
Współczynnik kontrastu:	1000:1