Instrukcja obsługi AMX NXA-AVB/ETHERNET

AMX przedłużacz AV NXA-AVB/ETHERNET

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX NXA-AVB/ETHERNET (2 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick Start Guide

NXA-AVB/ETHERNET Modero® Ethernet/Video Breakout Box

Overview

The NXA-AVB/ETHERNET Breakout Box (FG2254-10) facilitates the installation

and distribution of video, data, and audio to Modero touch panels located up to

200 feet (60.96 m) from the AVB box. This unit accepts either Composite or

S-Video from standard video devices. FIG. 1 shows the NXA-AVB/ETHERNET

Breakout Box.

For more detailed installation and operating instructions, refer to the specific

Modero touch panel instruction manual, available online at www.amx.com.

Specifications

NXA-AVB/ETHERNET Breakout Box

FIG. 1 shows the front and rear connectors on the breakout box.

Note: The breakout box unit can be mounted on either a horizontal flat surface

or into an equipment rack (by removing the front screws and attaching it to an

AC-RK).

Note: The PSN power supply being used on the NXA-AVB/ETHERNET is

dependent on the power requirements of the target touch panel.

Connections and Wiring

A PSN power supply can indirectly provide power to a Modero panel by routing

power through the NXA-AVB/ETHERNET Breakout Box. FIG. 2 shows a sample

wiring configuration using both an indirect or direct PSN power connection for a

video-capable Modero panel. Refer to the online Modero Touch Panel instruction

manuals for connection options.

The NXA-AVB/ETHERNET is an optional accessory for non-video capable

Modero touch panels but can only transfer Audio signals between the Breakout

Box and the target touch panel.

A PSN power supply can also directly provide power through the unit to a target

Modero panel. Refer to the specific Modero touch panel instruction manual for

detailed wiring information. FIG. 3 shows a sample wiring configuration for a

non-video capable Modero panel.

Note: AMX recommends using the above power connection examples when

connecting the breakout box to your touch panel. If you want to attempt another

configuration or if you want to use two power supplies, be sure to avoid any

potential ground loops that may occur in your connection configuration. Ground

loops can cause display errors with your touch panel.

Wiring the NXA-AVB/ETHERNET connectors and cables

The inputs and outputs on the breakout box are separated into front and rear

connectors. The rear connectors are used to input external signals. The front

connectors are used to communicate signals between the

NXA-AVB/ETHERNET and a target Modero panel. FIG. 4 provides a layout of

the wiring connection both into and from the breakout box.

FIG. 1 Connector layouts on the NXA-AVB/ETHERNET Breakout Box

NXA-AVB/ETHERNET Specifications

Dimensions

(HWD):

• 1.50" x 5.55" x 4.88" (3.81 cm x 14.10 cm x 12.40 cm)

• Width when attached to mounting ears: 6.65" (16.89 cm)

Power

Consumption:

• 50mA (with audio/video input)

• 23mA (with no audio/video)

• Routed through AVB using a PSN power supply (Refer to

FIG. 2 and FIG. 3 for more information).

Certifications: • FCC, CE, and EN60950

Front Components: • 2-pin 3.5 mm Phoenix connector for power to the touch panel

• Green LED provides an indication of power status

• RJ-45 connector provides Ethernet signals to the touch panel

• RJ-45 connector provides differential audio and video signals

to the touch panel (panel type dependent)

Rear Components: • 6-pin 3.5 mm Phoenix connector for in-bound (left/right

channel) audio

• 4-pin 3.5 mm Phoenix connector for out-bound (from

microphone) audio

• BNC connector (female) for Composite or Chroma

( for video-capable panels only)

• BNC connector (female) for luminance (for video-capable

panels only)

• RJ-45 connector for Ethernet input from the control system

• 2-pin 3.5 mm Phoenix connector for in-bound power

Features: • Accepts either Composite or S-Video (video-capable

panels only)

• Provides audio distribution to the non-video touch panels

over a CAT5 cable (up to 200 ft.)

• Provides video/audio distribution to the video-capable touch

panels over CAT5 cable up to 200 ft. (60.9 m)

Availability: • This unit is not included with current Modero panels

• This unit is included with VG-series Video Kits and with the

7" panels

Included

Accessories:

• Two 2-pin Phoenix connectors (41-5025)

• One 4-pin Phoenix connector (41-5047)

• One 6-pin Phoenix connector (41-5063)

• One Rack Mount Kit (KA2250-40) with mounting bracket

(62-2254-02)

Optional

Accessories:

• AC-RK Accessory RackMount Kit (FG515)

• Modero Table Top Cable (CA2250-50)

• PSN6.5 power supply (FG423-41) (panel dependent)

Power

(front)

Ethernet (to panel)

Audio/Video

Power (to panel)

S-Video Chroma

Composite/

Mic Out

Audio

Ethernet

S-Video

Luma

(rear)

(to panel)

FIG. 2 Sample wiring configuration on video-capable panels using this Breakout Box

FIG. 3 Sample Wiring configuration on non-video panel using this Breakout Box

NXD/T Video-capable

Ethernet In

PSN power

(RJ-45)

Video In

(BNC)

Mic Out

(4-pin captive-wire)

Audio In

(6-pin captive-wire)

NXA-AVB/ETHERNET

PSN4.4/6.5

supplied via

NXA-AVB box

Audio/Video

(CAT5)

Line Level out

(to amplifier

or VOL card)

Touch Panels

Direct

Connect

Breakout Box

Ethernet

(rear)

(front)

(CAT5)

supply

Indirect

Connect

PSN power

supply

Direct

connect

NXD/T Non-video capable

Ethernet

(CAT5)

Touch Panels

PSN power

Audio (CAT5)

between optional

NXA-AVB/ETHERNET

Breakout Box

supply

Specyfikacje produktu

Marka:	AMX
Kategoria:	przedłużacz AV
Model:	NXA-AVB/ETHERNET
Kolor produktu:	Czarny
Model:	Nadajnik i odbiornik AV
Wymiary produktu (SxGxW):	140.7 x 125.2 x 38.6 mm
Maks. rozdzielczość:	- px
Maksymalny dystans transferu:	60.96 m
Złożone wejście wideo:	1
Wejście S-Video:	1
Obsługiwane typy kabli:	Cat5