Instrukcja obsługi AMX VARIA-100N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX VARIA-100N (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 9 użytkowników na średnio 4.2 gwiazdek

QUICK START GUIDE

VARIA-100 10.1” Touch Panel

VARIA-100N -10.1” Touch Panel (NoComm)

Overview

AMX VARIA--100 (AMXUTP1011) & VARIA- -100N(AMXUTP1011N) are 10.1”

professional-s grade touch paneldesigned to adapt to the unique needs of your

environment by offering a selection of personas. Varia personas are pre-loaded

apps that define the entire panel experience.

s Microphone(except No-Comm)

S ettingsButton

Function Button

Side LED LAN/POE

USB

Speakers

FIG. 1 AMX - TP VARIA100ouch anel

Product Specifications

VARIASPECIFICATIONS- 100

Dimensions (HWD)

6 7/8x 9 9/16x 13/16” ” ”

(173.9mm x 242.88mm 5mm)x 20.

Weight

1.17 lb (532 g)

Power Consumption

PoE, 802.3af, 15.4 watt

External Power

Supply Required

Optimal performance requires use of one of the

following AMX PoE power supplies (not included):

•PS---POEAFTC, PoE Injector, 802.3AF

Compliant (FG423- 83)

•PS--AT-POETC, PoE Injector, 802.3AT

Compliant (FG423-84)

Certifications &

Compliance

•UL

•CE

•CB

•

FCC Class B (- 5dB)

Environmental

Operating Temperature

•0°C - – 40° C (32°F 104°F)

•5% - 85% Humidity

Storage Temperature

•-2– 64– 0 0°C 0° C (°F 14°F)

•

5% - 90% Humidity

Included Accessories

•Mounting Plate

•Adhesive Pad

•Set Screw

•

Installation Template

VARIA- 100 Installation

Varia - can be surfacemountedonto a wall, glass or other smooth surface, or

connect to any number of popular VESA mountswith the included mounting

bracket & hardware.

The VARIA- 100 converts to a tabletop touch panel when used in conjunction with

a tabletop stand accessory (sold separately).

TABLETOP STAND ACCESSORIES

VARIA-- ACS100F

(--01) AMXUMT10

AMX Varia Fixed Tabletop S tand

for VARIA-- 100 & VARIA100N

VARIA-- ACS810A

(--) AMXUMT8111

AMX Varia Angle- Select Tabletop Stand

for VARIA--80, VARIA100, & VARIA-100N

Power Over Ethernet

Power is supplied via Power Over Ethernet (PoE), utilizing an AMX certified PoE

injector such as the PS---POEAFTC PoE Injector (FG423-83) or compatible

network switch which is classified as ES1 and PS2 output in accordance with

IEC/EN/UL 62368-1. Connect the incoming Ethernet cable to the RJ-45 port on

the VARIA-. 100

Mounting Plate

The included mounting plate contains a 75x75VESA hole pattern, set screw, and

dedicated area for the included adhesive pad.

Set Screw

Adhesive Pad 75x75 VESA

FIG. 2 Mounting Plate

STEP 1: Installation Prerequisites

Prior to touch panel installation, identify a proper installation surface in

accordance with local laws and building codes.Ensure that your category cable

(networking cable) has access to the location.

STEP 2: Install the Mounting Plate

If installing on wall, mark your surface using the included installation template

for thefour (4)VESA holes and one (1) - desired cable passthrulocation. Drill

holes as required and screw the mounting bracket o, nto the surfaceusing

appropriate hardware for the surface (ie. drywall, concrete, brick, etc.).

If installing on glass or other smooth surfaceusing the adhesive pad, first apply

the adhesive pad to the mounting bracket, only exposing one side of the pad.

Then adhere the mounting bracket to the surface with the set screw hole facing

UP and the two tabs on the BOTTOM. Make sure it is a secure fit, but do not

apply too much pressure as glass may break.

STEP 3: Route Category Cable

Remove the panel’s lower touch rear cover by removing two (2) screws and then

sliding the cover off. Press therectangular holes to push the cover away from

you.

FIG. 3 Lower CoverHoles

P lug in the networking cableand route it outone (1) (3) of the three available

openings in the lower coverOnce fully seated, : left, right, or bottom. reattach

the lower rear cover.

Screw Location

Screw Location

Specyfikacje produktu