Instrukcja obsługi Apart CHAMP-4

Apart odbiornik CHAMP-4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Apart CHAMP-4 (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 28 osób i została oceniona przez 14.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF
Strona 1/12
Champ - 4
Professional quad power amplier
• Caution: hot and sharp surfaces ! This professional device needs to be installed by
qualied personnel only.
Please check the carton box for any kind of damage on reception of the goods. In case of a •
damaged carton, please contact your dealer before opening the carton.
!!!! Danger !!!! Exposure to extremely high noise levels may cause a permanent hearing •
loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose
somehearingifexposedtosufcientlyintensenoiseforasufcientamountoftime.Therefore
it is recommended that all persons exposed to equipment capable of producing high sound
pressurelevels,suchasthisamplier,beprotectedbyhearingprotectionwhileinstallingor
operating this unit.
• Read all documentation before operating your equipment.
Keep all documentation for future reference.•
Save the carton and packing material even if the equipment has arrived in good condition.•
Should you ever need to ship the unit, use only the original factory packing.•
Do not spill water or other liquids into or on the unit.•
Make sure power outlets conform to the power requirements listed on the back of the unit.•
Do not use the unit if the electrical power cord is frayed or broken.•
Always operate the unit with the AC ground wire connected to the electrical system ground.•
Havegaincontrolsonampliersturneddownduringpower-uptopreventspeakerdamageif•
there are high signal levels at the inputs.
Donotconnecttheinputs/outputsofampliersorconsolestoanyothervoltagesource,such•
asabattery,mainssource,orpowersupply,regardlessofwhethertheamplierorconsoleis
turned on or off.
Power down & disconnect units from mains voltage before making connections.•
Do not use the unit near stoves, heat registers, radiators, or other heat producing devices.•
Donotoperateequipmentonasurfaceorinanenvironmentwhichmaydistortthenormalow•
of air around the unit. If the unit is used in an extremely dusty or smoky environment, the unit
should be periodically “blown free” of dust.
Do not remove the cover. Removing the cover will expose you to potentially dangerous volt-•
ages.
Do not drive the inputs with a signal level higher than that required to drive equipment to full •
output.
Donotruntheoutputofanyamplierbackintoanotherinput.•
Do not ground the red output terminal, never connect a red output terminal to another red •
output terminal.
Incaseofmal-functionthisdeviceshouldbeservicedbyqualiedservicepersonnelonly.•
Customdesignedsidemountheatsinks,fourdiscreteclassABampliersinaoneunit19”•
enclosure.
Switchablehighandlowpassltersforeasyandtroublefreesubwoofer/satelliteapplications.•
IntegratedAPClimitercircuitryandclipindication.Thisintelligentcircuitwillpreventharsh•
distortion caused by clipping, provided that the input signal itself is not distorted of course…
what goes in, comes out.
Bridgeablepowerampliers:doubletheoutputpowerbyunitingthepowerof2ampliers.•
Minimum load impedance in bridge mode is 8 ohms.
Self-supportinglowresonanceframe.Torsionfreefrontandsidepanelconstructionwith•
integrated heatsink assembly.
Solidaluminumbrushedfrontpanelwithremovable19”bracketsandhandlesforuseina•
rack,noadditionalsupportneeded.Withoutthe19”bracketsitwillbeastandaloneunitin
high quality audio systems.
High power toroidal transformer.•
Low impedance power supply for improved dynamic response.•
Solid speaker binding posts.•
4 sets of banana screw plugs included.•
1. Features
2. Inputs and outputs
3. Rack mounting and wiring
4. standalone use
5. Technical specications

Specyfikacje produktu

Marka: Apart
Kategoria: odbiornik
Model: CHAMP-4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Apart CHAMP-4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Apart

Apart

Apart SBR160 Instrukcja

14 Października 2024
Apart

Apart REVAMP2060T Instrukcja

9 Września 2024
Apart

Apart CHAMP-3D Instrukcja

5 Września 2024
Apart

Apart MA125 Instrukcja

5 Września 2024
Apart

Apart CHAMP-ONE-SLV Instrukcja

4 Września 2024
Apart

Apart PA8250 Instrukcja

3 Września 2024
Apart

Apart CONCEPT1T Instrukcja

2 Września 2024
Apart

Apart MA200 Instrukcja

2 Września 2024
Apart

Apart REVAMP1680 Instrukcja

1 Września 2024
Apart

Apart MA240 Instrukcja

31 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Yamaha

Yamaha Aventage RX-A4A Instrukcja

9 Kwietnia 2025
Yamaha

Yamaha Aventage RX-A8A Instrukcja

9 Kwietnia 2025
Phonocar

Phonocar PH544 Instrukcja

5 Kwietnia 2025
DJI

DJI D-RTK 3 Instrukcja

4 Kwietnia 2025
Alpine

Alpine MRX-F65 Instrukcja

3 Kwietnia 2025
Harper

Harper HDT2-5010 Instrukcja

2 Kwietnia 2025
Harper

Harper HDT2-2010 Instrukcja

2 Kwietnia 2025
QSC

QSC SPA-Qf 60x2 Instrukcja

1 Kwietnia 2025
Streacom

Streacom TL1 Instrukcja

30 Marca 2025
Graupner

Graupner GR-8 Instrukcja

30 Marca 2025