Instrukcja obsługi APC NetBotz Camera Pod 165
APC
Kamera monitorująca
NetBotz Camera Pod 165
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC NetBotz Camera Pod 165 (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
NetBotz Camera Pod 165
Installation and Quick Start
NBPD0165
Product Description
The APC by Schneider Electric® NetBotz Camera Pod 165 is a motion-
sensitive camera capable of sending image data through a connection to
a NetBotz Rack Monitor 750. The Camera Pod 165 can be triggered by
the appliance in response to a number of environmental alarms or
events, such as a temperature spike or the action of opening a door. The
Camera Pod 165 can also provide constant surveillance of an area or
entrance.
Receiving
Inspect the package and contents for shipping damage. Make sure all
parts were sent. Immediately report any shipping damage to the shipping
agent. Report missing contents, product damage, or other problems with
the product to APC by Schneider Electric or your Schneider Electric
reseller.
NOTICE
The equipment contains, and the software enables, visual recording
capabilities, the improper use of which may subject you to civil and criminal
penalties. Applicable laws regarding the use of such capabilities vary between
jurisdictions and may require, among other things, express written consent
from recorded subjects. You are solely responsible for insuring strict
compliance with such laws and for strict adherence to any/all rights of privacy
and personalty. Use of this software for illegal surveillance or monitoring shall
be deemed unauthorized use in violation of the end user software agreement
and result in the immediate termination of your license rights thereunder.
Customer support and warranty information is available at
www.apc.com.
© 2019 APC by Schneider Electric. All rights reserved.
990-5974A-001 9/2019
Physical Description
Item Description
RJ-45 port For network and Power Over Ethernet (PoE) connections
Network LEDs Link LED: turns green to indicate a good network connection.
Activity LED: flashes orange to indicate network activity
Power jack Reserved for future use
Alarm In/Out Reserved for future use
Mounting hole Used to mount the Camera Pod 165
Micro SD card slot Reserved for future use
Reset button Press for at least 20 seconds to reset to factory defaults
aem0555a
Inventory
Item Description Quantity
Camera Pod 165 1
Rubber bracket cover 1
T-bar mounting plate 1
Set screw* 1
Hex wrench* 1
Ball-joint adjuster arm 2
Extender arm 2
Mounting plate 1
*Not used
aem0556a
Installation
Choose the mounting option (rack, wall, or ceiling) that meets your needs.
Then connect the Camera Pod 165 to your NetBotz appliance or to the
network.
Rack mount
Use #8 sheet-metal screws (not provided) to secure the camera pod. Use
a #32 drill to make four 2.94 mm (0.116 in) pilot holes in the rack.
Ceiling mount
aem0283c
aem0285c
Specyfikacje produktu
| Marka: | APC |
| Kategoria: | Kamera monitorująca |
| Model: | NetBotz Camera Pod 165 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z APC NetBotz Camera Pod 165, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kamera monitorująca APC
4 Września 2024
1 Września 2024
29 Sierpnia 2024
28 Sierpnia 2024
25 Sierpnia 2024
20 Sierpnia 2024
6 Lipca 2024
Instrukcje Kamera monitorująca
- Lorex
- Foscam
- Speco Technologies
- Burg Wächter
- BRK
- Nest
- Security Labs
- Grundig
- Tenda
- DataVideo
- ZTE
- Digimerge
- Bea-fon
- Strong
- Ganz
Najnowsze instrukcje dla Kamera monitorująca
28 Stycznia 2025
25 Stycznia 2025
17 Stycznia 2025
17 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025