Instrukcja obsługi Audio-Technica AT4081
Audio-Technica
mikrofon
AT4081
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT4081 (4 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
40 series microphones
AT4081
Bidirectional Active Ribbon Microphone
Features
• Smooth,warmandnaturalsoundwithprecise,articulatedetail
tomeetthecriticalrequirementsoftoday’srecording,broadcast
andsoundreinforcementprofessionals
• GroundbreakingAudio-Technicaribbondesignwith18patents
pending
• ProprietaryMicroLinear™ribbonimprintforsuperiordurability
andfreedomfromlateralexinganddistortion
• Innovativedualribbonconstructionforincreasedsensitivity
• ExtremelypowerfulN50rare-earthneodymiummagnetsforhigh
outputlevel
• Ultra-nemeshhelpsprotectagainstribbondamagefromwind
andplosives
• Classicbidirectional(gure-of-eight)polarpatternpicksup
soundsequallyfromthefrontandbackoftheelement
• High-SPLcapabilityforexceptionallyversatileperformance
• Extendedfrequencyresponsefornaturalaudioreproduction
• Handmadeproduction–includingribboncorrugation,imprint
andassembly
• Low-prolestickdesignmaximizesplacementoptions
• Phantom-poweredactiveelectronicsprovidestableimpedance
andhigheroutputformaximumcompatibilitywithmicrophone
preampliers
Description
The AT4081 is a side-address active ribbon microphone with a
bidirectional polar pattern. Delivering the warmth and natural sound
of a classic ribbon microphone, the AT4081offers a robust build for
long-lasting performance and high gain for easy use with microphone
preampliers.
With 18 patents pending, Audio-Technica’s innovative ribbon transducer
advances the evolution of ribbon microphone technology, combining
remarkable durability and high-SPL capability with smooth, rich audio
quality. The microphone is recommended for horns, strings, acoustic
instruments, drum overheads, orchestras, ensembles and guitar cabinets.
It excels in recording studios as well as in live-sound settings.
A signicant breakthrough in ribbon cartridge design, Audio-Technica’s
patent-pending MicroLinear ™
ribbon imprint minimizes ribbon distortion
for durable performance and accurate reproduction of the sound source.
While the application of phantom power was prohibited for old-
school ribbon microphones, Audio-Technica’s AT4081 requires 48V
phantom power for operation. The phantom power is used—not for the
microphone’s dynamic ribbon transducer—but for its active electronics,
which bring its output to near condenser microphone level. This high-
output and stable impedance make the microphone easy to integrate
with microphone preampliers.
The bidirectional polar pattern of the microphone makes it equally
sensitive to sounds originating in front and back of the element.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing. The included AT8471
isolation clamp provides superior isolation and permits mounting on any
microphone stand with 5/8"-27 threads. A windscreen and a protective
carrying case are also included.
Operation & Maintenance
The AT4081 requires 48V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” – positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
An Audio-Technica emblem is on the front of the microphone. Position this
side of the microphone toward the sound source.
Note: While Audio-Technica ribbon microphones designed for superior
durability, we recommend the following precautions when dealing with
ribbon microphones: do not blow directly into the ribbon assembly; use the
supplied windscreen for up-close vocal use.
Take care to keep foreign particles from entering the windscreen. An
accumulation of foreign material in the ribbon structure and/or the
windscreen’s mesh surface, can degrade performance. Avoid leaving the
microphone in the open sun or in areas where temperatures exceed 110°
F (43° C) for extended periods. Extremely high humidity should also be
avoided.
Architect’s and Engineer’s Specications
The microphone shall be an active ribbon microphone with a side-address
stick design. It shall have a bidirectional polar pattern and a frequency
response of 30 Hz to 18,000 Hz. The microphone shall operate from an
external 48V DC phantom power source. It shall be capable of handling
sound input levels up to 150 dB with a dynamic range of 125 dB. Nominal
open-circuit output voltage shall be 7.9 mV at 1V, 1 Pascal. Output shall
be low impedance balanced (100 ohms).
The output of the microphone shall be a 3-pin XLRM-type connector.
The microphone shall be 155.0 mm (6.10") long and have a body diameter
of 21.0 mm (0.83"). Weight shall be 152 g (5.4 oz). The microphone shall
include an isolation clamp, a windscreen and a protective carrying case.
The Audio-Technica AT4081 is specied.
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | AT4081 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica AT4081, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- Universal Audio
- Konig & Meyer
- Prodipe
- Bigben
- Trust
- Majority
- Gravity
- Fenton
- Telefunken
- Mojave
- DAP-Audio
- Technaxx
- Manley
- DB Technologies
- Omnitronic
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025