Instrukcja obsługi Audio-Technica AT882TH
Audio-Technica
mikrofon
AT882TH
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT882TH (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 13 użytkowników na średnio 5.0 gwiazdek
Strona 1/2
Description
The AT882TH requires a phantom power supply of 11–52V DC for each element.
Output is low-impedance balanced. The balanced signal appears across Pins 2 and 3,
while the ground (shield) connection is Pin 1. Output is phased so that positive acoustic
pressure produces positive voltage at Pin 2, in accordance with industry convention.
Each of the elements in the microphone is shock mounted. The Hypercardioid polar
pattern of the elements provides a 100°angle of acceptance. The AT882TH is designed
with integral wind-screens to ensure maximum security against wind noise and
plosives.
The microphone is enclosed in a sturdy metal housing with small-diameter rigid-pipe.
A low-reflectance black finished desk stand connected with a 2 meter splitter cable,
which terminates in two 3-pin XLRM-type connectors, for in-house and remote feeds.
The AT882TH is intended for use on a flat surface. The 2 meter splitter cable terminates
in two 3-pin XLRM-type connectors, which can be connected to in-house and/
or remote feeds. Connect the red output (Channel A) to the primary in-house feed.
Connect the gray output (Channel B) to the remote feed.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed
43°C for extended periods. Extremely high humidity should also be avoided.
Features
• Designed for quality sound reinforcement in demanding situations, especially those
requiring separate miking for PA and broadcast.
• Dual-element Hypercardioid condenser microphone with two independent power
module.
• Circuit grounds for each channel are completely isolated, greatly reducing the
potential for hum.
• Integral windscreens ensure ultimate security against wind noise and plosives.
• Small-diameter rigid-pipe design with pivoting ball-in-socket base permits flexible
positioning.
• Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to
the microphones.
Specifications
Element Dual back electret condenser
Polar pattern Hypercardioid
(Unidirectional)
Frequency response 20-20,000 Hz
Open circuit sensitivity -35 dB
(17.8 mV)
re 1V at 1 Pa
Impedance 100 ohms
Maximum input sound level 130 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise ratio >66 dB, 1 kHz at 1 Pa
Phantom power requirements 11-52V DC, 2 mA typical
Weight 1.14 kg
Dimensions 354 mm - Max. long,
345 mm - Max. height,
102 mm - Width
Cable 2 m long, vinyl-jacketed stereo cable
Output connector Two 3-pin XLRM-type
polar pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Audio-Technica Corp. Machida • Tokyo • Japan 2017 MAR FORM No. ATGC-L0340-17-E
Optional Accessories:
AT8201 line matching transformer (Lo-z to
50,000 ohms)
AT8202 adjustable in-line attenuator for use
with low-impedance microphones.
AT8506 four-channel 48V phantom power
supply (AC powered).
Dual-element Hypercardioid Condenser Microphone
AT882TH
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | AT882TH |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica AT882TH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- LD Systems
- Thronmax
- Tascam
- Trust
- Speco Technologies
- Adastra
- Hohem
- HyperX
- Marantz
- Midas
- Auray
- Epcom
- Turtle Beach
- ONYX
- Bontempi
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025