Instrukcja obsługi Audio-Technica AT850/H


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT850/H (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 16.5 użytkowników na średnio 5.0 gwiazdek

Strona 1/2
HYPERCARDIOID CONDENSER
GOOSENECK MICROPHONE
- Designed for high-quality
sound reinforcement and
other demanding sound
pickup situations.
- Hypercardioid polar pat-
tern reduces pickup of
sounds from the sides and
rear, improving isolation of
desired sound source.
- Small diameter gooseneck
is very easy to manipulate
for proper positioning. It is
heavily lubricated to offer
very smooth and quiet
operation.
- The integral power module
can be powered from any
external 11V to 52V phan-
tom power supply.
SPECIFICATIONS
ELEMENT
POLAR PATTERN
FREQUENCY RESPONSE
OPEN CIRCUIT SENSITIVITY
IMPEDANCE
MAXIMUM INPUT SOUND LEVEL
SIGNAL-TO-NOISE RATIO
PHANTOM POWER REQUIREMENTS
WEIGHT
DIMENSIONS
OUTPUT CONNECTOR
ACCESSORIES FURNISHED
Back electret condenser
Hypercardioid (Unidirectional)
70 - 20,000 Hz
-35 dB (17.8 mV) re 1V at 1 Pa
100 ohms
129 dB SPL, 1 kHz at 1% T.H.D.
>68 dB, 1 kHz at 1 Pa
11-52V DC, 2 mA typical
97 g
429 mm - long,
12.0 mm - head diameter,
18.9 mm - base diameter
Integral 3-pin XLRM-type
AT8146 foam windscreen
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Optional Accessories:
AT8201 line matching transformer (Lo-z to
50,000 ohms)
AT8202 adjustable in-line attenuator for
use with low-impedance microphones.
AT8651 threadmount adapter.
AT8506 four-channel 48V phantom power
supply (AC powered).
AT8801/EU single-channel 48V phantom
power supply (AC powered).
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
FORM No. ATGC-L0171-10-E
Machida Tokyo Japan
- Self-contained unit ready to plug into a mating XLRF-type
panel jack or cable connector.
- Sanp-on foam windscreen simply slips over the head of the
microphone, effectively reducing wind noise or ‘popping’ when
used extra-close.
- Optional shock mount attenuates noise, vibration and shock
transmitted through the mounting surface.
The microphone is enclosed in a rugged housing with a low-
reflectance black finish. It features an XLRM-type connector
insert at its base, allowing it to be plugged directly into an XLRF-
type panel jack or microphone cable.
The AT850/H stands 429 mm from the table or podium. The
model output is low impedance balanced. The output connector
mates with XLRF-type cable connectors. The balanced
signal appears across Pins 2 and 3, while the ground (shield)
connection is Pin 1. Output is phased so that positive acoustic
pressure produces positive voltage at Pin 2, in accordance with
industry convention.
The microphone is equipped with UniGuard® RFI-shielding
technology, which offers outstanding rejection of radio frequency
interference (RFI). The microphone is RoHS compliant free
from all substances specied in the EU directive on hazardous
substances.
The high sensitivity of the AT850/H ensures useful output and
an excellent match to most mixer, type recorder and amplier
inputs. It will provide undistorted output even in sound fields
as loud as 129 dB SPL. However, due to the high sensitivity, in
some instances it may be possible to overload sensitive input
stages.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43°C for extended periods. Extremely
high humidity should also be avoided.


Specyfikacje produktu

Marka: Audio-Technica
Kategoria: mikrofon
Model: AT850/H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica AT850/H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą