Instrukcja obsługi Audio-Technica AT882TL/SS
                    Audio-Technica
                    
                    mikrofon
                    
                    AT882TL/SS
                
                                
    Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT882TL/SS (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 37 osób i została oceniona przez 19 użytkowników na średnio 4.8 gwiazdek
                        Strona 1/2
                    
                    
                    
Description
The AT882TL/SS requires a phantom power supply of 11–52V DC for each element. Output is low-
impedance balanced. The balanced signal appears across Pins 2 and 3, while the ground (shield) 
connection is Pin 1. Output is phased so that positive acoustic pressure produces positive voltage 
at Pin 2, in accordance with industry convention.
Each of the elements in the microphone is shock mounted. The Line-cardioid polar pattern of the 
elements provides a 90°angle of acceptance. The AT882TL/SS is designed with integral wind-
screens to ensure maximum security against wind noise and plosives.
The microphone features a rubber switch that toggles between on/mute in Channel A (red 
output), and a LED indicator that displays On status. This switch does not affect the output of 
Channel B. 
The microphone is enclosed in a sturdy metal housing with a low-reflectance black finish. Its base 
is a desk stand that connected with a 2 meter splitter cable, which terminates in two 3-pin XLRM-
type connectors, for in-house and remote feeds.
The AT882TL/SS is intended for use on a flat surface. The 2 meter splitter cable terminates in two 
3-pin XLRM-type connectors, which can be connected to in-house and/or remote feeds. Connect 
the red output (Channel A) to the primary in-house feed. Connect the gray output (Channel B) to 
the remote feed.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for 
extended periods. Extremely high humidity should also be avoided.
Features
•  Designed for quality sound reinforcement in demanding situations, especially those 
requiring separate miking for PA and broadcast.
•  Dual-element Line-cardioid condenser microphone with two independent power 
module.
•  A rubber switch with LED allows users to easily mute/un-mute the Channel A (red 
output) signal of microphone.
•  Circuit grounds for each channel are completely isolated, greatly reducing the potential 
for hum.
•  Integral windscreens ensure ultimate security against wind noise and plosives.
•  Sturdy metal housing design with ball-in-socket base permits flexible positioning.
•  Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to 
the microphones.
Specifications
Element Dual back electret condenser
Polar pattern Line-cardioid (Unidirectional)
Frequency response 20-20,000 Hz
Open circuit sensitivity -31 dB (28.2 mV) re 1V at 1 Pa
Impedance  100 ohms
Maximum input sound level 126 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise ratio >69 dB, 1 kHz at 1 Pa
Phantom power requirements 11-52V DC, 2 mA typical
Switch  Push button control:  Channel A on/mute
Weight  1.22 kg
Dimensions 214 mm - long, 
227 mm - Max. height,
102 mm - Width
Cable  2 m long, vinyl-jacketed stereo cable  
Output connector Two 3-pin XLRM-type
polar pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency  response
Frequency in Hertz
Response in dB
12” or more on axis
Audio-Technica Corp.  Machida • Tokyo • Japan  2018 NOV FORM No. ATGC-L0362-18-E
Optional Accessories:
AT8201 line matching transformer (Lo-z to 
50,000 ohms)
AT8202 adjustable in-line attenuator for use 
with low-impedance microphones.
AT8506 four-channel 48V phantom power 
supply (AC powered).
Dual-element Line-cardioid Condenser Microphone (with Single channel Switch and LED)
AT882TL/SS
Specyfikacje produktu
| Marka: | Audio-Technica | 
| Kategoria: | mikrofon | 
| Model: | AT882TL/SS | 
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica AT882TL/SS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
                        
                         1 Marca 2025
                        
                    
                                                            
                        
                         13 Stycznia 2025
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            
                        
                         6 Grudnia 2024
                        
                    
                                                            Instrukcje mikrofon
- Galaxy Audio
- Stageclix
- Sharkoon
- Xvive
- Brigmton
- Hollyland
- IC Intracom
- Soundsation
- SPL
- Schertler
- GVM
- Palmer
- Tula
- United
- Countryman
Najnowsze instrukcje dla mikrofon
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         2 Kwietnia 2025
                        
                    
                                                            
                        
                         2 Kwietnia 2025
                        
                    
                                                            
                        
                         2 Kwietnia 2025