Instrukcja obsługi Audio-Technica ATM-450
Audio-Technica
mikrofon
ATM-450
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ATM-450 (7 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 13.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
artist series live sound microphones
ATM450
Cardioid Condenser Instrument Microphone
Features
• Uncompromising sound quality for overheads, percussion,
acoustic guitar, strings and other acoustic instruments
• Unique side-address stick design maximizes placement options
with minimal obstructions
• Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
• Rugged all-metal design and construction for years of trouble
free use
• Isolation clamp provides secure mounting, versatile positioning,
and effective dampening of unwanted mechanical noise
• Integral 80 Hz high-pass lter switch and 10 dB pad switch
Description
The ATM450 is a xed-charge condenser microphone with a cardioid
polar pattern. It is designed specically for use on overheads, percussion,
acoustic guitar, strings and other acoustic instruments in professional
live-sound and studio applications.
The microphone requires 11V to 52V phantom power for operation.
The cardioid polar pattern of the microphone is more sensitive to sound
originating directly in front of the element, making it useful for controlling
feedback and reducing pickup of unwanted sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is equipped with a switchable 10 dB pad and a switch
that permits choice of at response or low-frequency roll-off (via integral
80 Hz high-pass lter).
The microphone is enclosed in a rugged housing. The included AT8471
isolation clamp permits mounting on any microphone stand with 5/8"-27
threads. A windscreen and a soft protective pouch are also included.
Operation and Maintenance
The ATM450 requires 11V to 52V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
An integral 80 Hz high-pass lter provides easy switching from a at
frequency response to a low-end roll-off. The roll-off position reduces
the pickup of low-frequency ambient noise (such as trafc, air-handling
systems, etc.), room reverberation and mechanically coupled vibrations.
To engage the high-pass lter, use the end tip of a paperclip or other
small pointed instrument to slide the switch toward the “bent” line.
The microphone is also equipped with a switchable 10 dB pad that
lowers the microphone’s sensitivity, thus providing higher SPL capability
for exible use with a wide range of users and system congurations.
To engage the 10 dB pad, use the end tip of a paperclip or other small
pointed instrument to slide the switch toward the -10 position.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | ATM-450 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica ATM-450, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- Epcom
- Vonyx
- Lorgar
- Soundsation
- Peerless-AV
- Lectrosonics
- Simplecom
- Chandler
- Telefunken
- GoPro
- Teac
- LD Systems
- DAP-Audio
- Phonak
- Synco
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025