Instrukcja obsługi Audio-Technica ATM230

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ATM230 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 9 użytkowników na średnio 4.9 gwiazdek

ATM230

Hypercardioid Dynamic Instrument Microphone

FORM No. ATGC-L0333-16-E

Machida • Tokyo • Japan

polar pattern

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

8 kHz

200 Hz

1 kHz

5 kHz

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

10 dB

20k10k5k2k1k50020010050

LEGEND

frequency response

Frequency in Hertz

Response in dB

12” or more on axis

Specifications

ElementDynamic

Polar patternHypercardioid

Frequency response30-12,000 Hz

Open circuit sensitivity-54 dB

(1.9 mV)

re 1V at 1 Pa

Impedance600 ohms

Weight292 g

Dimensions82.5 mm - long,

38.0 mm - maximum diameter

Output connectorIntegral 3-pin XLRM-type

Accessories furnishedAT8665 drum mount for 5/8"-27 threaded

adapter;

5/8"-27 to 3/8"-16 threaded adapter;

Soft protective pouch

Features

•Tailoredtocapturesoundfromrackandfloortoms,snaredrumsand

otherpercussioninstruments

•HandlesveryhighSPLatcloserange

•Hypercardioidpolarpatternreducespickupofsoundsfromthesides

andrear,improvingisolationofdesiredsoundsource

•Rareearthmagnetforimprovedoutputandtransientresponse

•Low-profiledesignpermitsversatileplacementarounddrumkit

•Rugged,all-metalconstructionensuresdependableperformancein

live-musicandstudioapplications

•Integral5/8"-27threadedstandclampworkswithincludeddrum

mounttopermitmountingofmictodrumrim

Description

The ATM230 is a dynamic microphone with a hypercardioid polar pattern. It

is designed specically for musical instrument pickup in the studio and on

stage.

The hypercardioid polar pattern of the microphone is more sensitive to

sound originating directly in front of the element, making it useful for

controlling feedback and reducing pickup of unwanted sounds.

The output of the microphone is a 3-pin XLRM-type connector.

The microphone is enclosed in a rugged housing and is outtted with an

integral 5/8"-27 threaded stand clamp. The included AT8665 drum mount

screws into the stand clamp to permit mounting of the ATM230 to the rim

of a drum. A soft protective pouch is also included.

Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2

and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”- positive acoustic

pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be wired

consistently: Pin 1-to-Pin 1, etc.

Avoid leaving the microphone in the open sun or in areas where

temperatures exceed 43° C for extended periods. Extremely high humidity

should also be avoided.

Take care to keep foreign particles from entering the windscreen. An

accumulation of iron or steel filings on the diaphragm, and/or foreign

material in the windscreen's mesh surface, can degrade performance.

Specyfikacje produktu