Instrukcja obsługi Audio-Technica ATM410
Audio-Technica
mikrofon
ATM410
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ATM410 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 31 osób i została oceniona przez 16 użytkowników na średnio 4.6 gwiazdek
Strona 1/2
CARDIOID DYNAMIC VOCAL MICROPHONE
- Tailored for smooth, natural vocal reproduction.
- Cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of desired sound source.
- Durable performance for professional applications.
- Hi-ENERGY® neodymium magnet for improved output and transient
response.
- Excellent off-axis rejection for minimum feedback.
- Superior anti-shock engineering for low handling noise.
- Multi-stage grille design offers excellent protection against plosives
and sibilance without compromising high-frequency clarity.
- Quiet-Flex™ stand clamp provides silent, exible microphone
positioning.
- Corrosion-resistant contacts from gold-plated XLRM-type connector.
- Rugged, all-metal design and construction for years of trouble-free
use.
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins 2 and
3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” - positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must
be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance
(Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching
transformer (A-T CP8201 or equal) at the equipment input.
When using the ATM410 in settings with a stage monitor speaker,
the speaker should be located 180° off axis (at the rear of the
microphone). This placement, in conjunction with the microphone’s
uniform cardioid pickup pattern, will virtually eliminate the possibility
of undesired audio feedback.
Take care to keep foreign particles from entering the windscreen.
An accumulation of iron or steel filings on the diaphragm, and/or
foreign material in the windscreen’s mesh surface, can degrade
performance.
FORM No. ATGC-L0030-06-E
Machida • Toky o • Japa n
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 90-16,000 Hz
OPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 Pa
IMPEDANCE 300 ohms
WEIGHT (less cable and accessories) 233 g
DIMENSIONS 170.0 mm - long,
53.5 mm - diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for
⅝”-27 threaded stand;
⅝”-27 to ⅜”-16 threaded adapter;
Soft protective pouch
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | ATM410 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica ATM410, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- Telefunken
- Sandberg
- Trevi
- ESI
- Gemini
- CKMOVA
- Catchbox
- GVM
- IMG Stageline
- Vonyx
- Teac
- Blaupunkt
- Fishman
- Kopul
- Joy-It
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025