Instrukcja obsługi Audio-Technica ES935C6
Audio-Technica
mikrofon
ES935C6
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ES935C6 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.7 gwiazdek
Strona 1/2
CARDIOID CONDENSER GOOSENECK MICROPHONE
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Optional Accessories:
AT8474 universal isolation mount.
AT8473 quick-mount stand adapter.
AT8506 four-channel 48V phantom
power supply (AC powered).
AT8668 quick-mount plug-in micro-
phone desk stand.
AT8801/EU single-channel 48V
phantom power supply (AC pow-
ered).
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Roll-off
Response in dB
FORM No. ATGC-L0096-07-E
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 30-20,000 Hz
LOW-FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -40 dB (10.0 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 138 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 109 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1Pa
SWITCHES Flat, roll-off
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
WEIGHT 104 g
DIMENSIONS 197.3 mm - long
8.4 mm - head diameter,
18.9 mm - base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8109 two-stage foam windscreen
OPTIONAL INTERCHANGEABLE
ELEMENTS
ESE-O omnidirectional (360°)
ESE-H hypercardioid (100°)
ESE-ML MicroLine ® (90°)
ES935C6 is a wide-range miniature
condenser microphone with a cardioid
polar pattern. It is designed for quality
sound reinforcement, professional
r e c o r d i n g , e l e v i s i o n a n d o t h e r
demanding sound pickup applications.
The small-diameter gooseneck design
permits highly flexible positioning while
maintaining a smooth, well-contoured
appearance. An included snap-on foam
windscreen effectively reduces wind
noise and “popping.”
T h e E S 9 3 5 C 6 i s e q u i p p e d w i t h
UniGuard® RFI-shielding technology,
which offers outstanding rejection of
radio frequency interference (RFI). The
microphone is RoHS compliant – free
from all substances specied in the EU
directive on hazardous substances.
The microphone's cardioid polar pattern
provides a 120° angle of acceptance.
Additional interchangeable elements with
omnidirectional (360°), hyper-cardioid
(100°) and MicroLine® (90°) pickup
patterns are available.
The integral power module can be powered from any external 11V
to 52V DC phantom power supply. A recessed switch in the power
module permits choice of at response or low-frequency roll-off (via
integral 80 Hz high-pass UniSteep® lter) to help control undesired
ambient noise.
The microphone is enclosed in a rugged housing with a low-
reectance black nish. It features an XLRM-type connector insert at
its base, allowing it to be plugged directly into an XLRF-type panel
jack or microphone cable. An AT8474 low-prole isolation mount or
AT8473 stand clamp is optional to permit attachment of the XLR mic
base to a standard ⅝"-27 or ⅜"-16 threaded mic stand or mounting
ange.
The ES935C6 stands 197.3 mm from the table or podium. The model
output is low impedance balanced. The output connector mates with
XLRF-type cable connectors. The balanced signal appears across
Pins 2 and 3, while the ground (shield) connection is Pin 1. Output is
phased so that positive acoustic pressure produces positive voltage
at Pin 2, in accordance with industry convention.
The integral 80 Hz high-pass UniSteep® filter provides easy
switching from a flat frequency response to a low-end roll-off. The
roll-off position reduces the pickup of low-frequency ambient noise
(such as traffic, airhandling systems, etc.), room reverberation and
mechanically coupled vibrations. To engage the UniSteep® lter, use
the end tip of a paperclip or other small pointed instrument to slide
the switch toward the “bent” line.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43°C for extended periods. Extremely high
humidity should also be avoided.
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | ES935C6 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica ES935C6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- ART
- Fun Generation
- Saramonic
- Pixel
- Jabra
- Williams Sound
- RCF
- Atlas
- Tonsil
- Telefunken
- Audac
- Epcom
- Max
- Sabian
- President
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025