Instrukcja obsługi Audio-Technica MT828a
Audio-Technica
mikrofon
MT828a
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica MT828a (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.1 gwiazdek
Strona 1/2
SUBMINIATURE CARDIOID CONDENSER CLIP-ON MICROPHONE
- Maximum intelligibility and clean, accurate reproduction for lecturers,
stage and television talent, and worship leaders.
- Low-prole design is ideal for applications requiring minimum visibility.
- Includes a wire clothing clip and a metal-frame pop lter.
- MT828a is switchable for low-frequency roll-off reduces sensitivity to
popping in close vocal use.
- MT828a can be operated on battery or phantom power.
- MT828cW is terminated for use with all Audio-Technica UniPak™
wireless systems.
The MT828a / MT828cW is worn on the clothing of performers for
excellent yet unobtrusive sound pickup. Its small size makes the
microphone ideal for use in applications where minimum visibility is
required. Close-up voice pickup is crisp and clean, yet full sounding,
while suppression of background noise and undesired audio feedback
are signicantly improved over that of full-size cardioid microphones.
The included clothing clip and metal-frame pop filter are removable.
When using the MT828a / MT828cW in extremely close situations, slip
the included metal-frame pop lter over the mic to reduce wind noise or
“poping”.
MT828a
Includes a power module AT8531 that requires 11V to 52V DC phantom
power, or a 1.5V AA battery for operation. A battery need not be in place
for phantom power operation.
An integral 80Hz high-pass filter provides easy switching from a flat
frequency response to a low-end roll-off. The roll-off position reduces
the pickup of low-frequency ambient noise (such as trafc, air-handling
systems, etc.), room reverberation and mechanically coupled vibrations.
Output from the power module’s XLRM-type connector is low impedance
(Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground
(shield). Output phase is “Pin 2 hot” - positive acoustic pressure produces
positive voltage at Pin 2. To avoid phase cancellation and poor sound, all
mic cables must be wired consistently: Pin 1-to-Pin 1, etc.
MT828cW
Less power module and includes clothing clip and metal-frame pop lter
only. 1.6 m cable terminated with locking 4-pin connector for Audio-
Technica UniPak™ body-pack wireless transmitters.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 40°C for extended periods. Extremely high humidity
should also be avoided.
FORM No. ATGC-L0073-07-E
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-change back plate permanently
polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 100-12,000 Hz
OPEN CIRCUIT SENSITIVITY -64 dB (0.63 mV) re 1V at 1 Pa (capsule)
IMPEDANCE 1600 ohms (capsule)
OPERATING VOLTAGE 1-10V DC (capsule)
LOW FREQUENCY ROLL-OFF (MT828a)80 Hz, 12 dB/octave
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (MT828a)
BATTERY TYPE 1.5V AA (MT828a)
BATTERY CURRENT / LIFE 2.0 mA / 1200 hours (MT828a)
SWITCHES (MT828a)Flat, roll-off
WEIGHT (less cable and accessories)
MICROPHONE
POWER MODULE (AT8531)
7.5 g
81.2 g
DIMENSIONS
MICROPHONE
POWER MODULE (AT8531)
19.4 mm - long,
7.3 mm - diameter
83.0 mm - H x 63.0 mm - W x
22.0 mm - D
OUTPUT CONNECTOR
MT828a (AT8531)
MT828cW
Integral 3-pin XLRM-type
locking 4-pin connector for UniPak™
CABLE 1.6 m long (permanently attached to
microphone), 2 mm diameter
ACCESSORIES FURNISHED Wire clothing clip;
metal-frame pop lter;
protective pouch.
AT8531 power module (MT828a)
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Roll-off (MT828a)
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | MT828a |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica MT828a, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- DOCKIN
- Manta
- Elgato
- Livoo
- Sanken
- Microtech Gefell
- RCF
- Vaddio
- Solid State Logic
- American Audio
- Hohner
- Auna
- Røde
- Behringer
- Mirfak Audio
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025