Instrukcja obsługi Audio-Technica MT830a
Audio-Technica
mikrofon
MT830a
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica MT830a (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 16.5 użytkowników na średnio 4.3 gwiazdek
Strona 1/2
SUBMINIATURE OMNIDIRECTIONAL CONDENSER MICROPHONE
- Maximum intelligibility and clean, accurate reproduction for lecturers,
singers, stage and TV performers.
- Low-prole design is ideal for applications requiring minimum visibility.
- Includes a clothing clip and accessory windscreens.
- MT830a is switchable for low-frequency roll-off reduces sensitivity to
popping in close vocal use.
- MT830a can be operated on battery or phantom power.
- MT830cW is terminated for use with all Audio-Technica UniPak™
wireless systems.
The MT830a / MT830cW is a subminiature condenser microphone
intended to be worn on the clothing of performers for excellent yet
unobtrusive sound pickup. The wide-range capability of the microphone
ensures clean, accurate reproduction with high intelligibility for lecturers,
singers, stage and TV performers, as well as musical instruments. Its
small size makes the microphones ideal for use in applications where
minimum visibility is required.
The microphone element is enclosed in a rugged housing with low-
reectance nish. Internal construction is designed to minimize handling
and clothing noise. A 1.4m cable is provided between the microphone
and terminal plug. A clothing clip and accessory windscreens are also
provided.
MT830a
Includes a power module AT8531 that requires 11V to 52V DC phantom
power, or a 1.5V AA battery for operation. A battery need not be in place
for phantom power operation.
An integral 80Hz high-pass filter provides easy switching from a flat
frequency response to a low-end roll-off. The roll-off position reduces
the pickup of low-frequency ambient noise (such as trafc, air-handling
systems, etc.), room reverberation and mechanically coupled vibrations.
Output from the power module’s XLRM-type connector is low impedance
(Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground
(shield). Output phase is “Pin 2 hot” - positive acoustic pressure produces
positive voltage at Pin 2. To avoid phase cancellation and poor sound, all
mic cables must be wired consistently: Pin 1-to-Pin 1, etc.
MT830cW
Less power module and includes clothing clip and metal-frame pop lter
only. 1.4 m cable terminated with locking 4-pin connector for Audio-
Technica UniPak™ body-pack wireless transmitters.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 40°C for extended periods. Extremely high humidity
should also be avoided.
FORM No. ATGC-L0075-07-E
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-change back plate permanently
polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 30-20,000 Hz
OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa (MT830a)
IMPEDANCE 200 ohms (MT830a)
MAXIMUM INPUT SOUND LEVEL 131 dB SPL, 1 kHz at 1% T.H.D. (MT830a)
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave (MT830a)
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (MT830a)
BATTERY TYPE 1.5V AA (MT830a)
BATTERY CURRENT / LIFE 2.0 mA / 1200 hours (MT830a)
SWITCHES (MT830a)Flat, roll-off
WEIGHT (less cable and accessories)
MICROPHONE
POWER MODULE (AT8531)
1.3 g
81.2 g
DIMENSIONS
MICROPHONE
POWER MODULE (AT8531)
15.8 mm - L,
8.5 mm - W, 5.0 mm - thick
83.0 mm - H x 63.0 mm - W x
22.0 mm - D
OUTPUT CONNECTOR
MT830a (AT8531)
MT830cW
Integral 3-pin XLRM-type
locking 4-pin connector for UniPak™
CABLE 1.4 m long (permanently attached to micro-
phone), 2.5 mm diameter
ACCESSORIES FURNISHED Clothing clip;
Windscreens;
protective pouch.
AT8531 power module (MT830a)
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
Roll-off (MT830a)
same as 1 kHz
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | MT830a |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica MT830a, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- Marshall Electronics
- Majority
- Speed-Link
- Antelope
- Atlas
- Jabra
- Reloop
- Ambient Recording
- White Shark
- NOX
- Yamaha
- DJI
- Technaxx
- Vicoustic
- Mojave
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025