Instrukcja obsługi AXESS AXAMP-FD2
AXESS
Nie skategoryzowane
AXAMP-FD2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AXESS AXAMP-FD2 (6 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
AXAMP-FD2
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 1/30/25 INSTAXAMP-FD2
INTERFACE FEATURES
INTERFACE COMPONENTS
TABLE OF CONTENTS
Installation & Installation Options ........................2
Adding Amp/Amps to a Factory System
Non-amplified ......................................................3
Amplified .............................................................. 4
Troubleshooting: LED Feedback ...........................6
Amplifier Integration Interface
Fits Ford
2011-2023
• Designed for amplified and non-amplified models
• Provides 6 channels of 5-volt RMS audio
• Non-fading full range output (Channels 5 & 6)
• Includes plug-n-play harnessing
• Simple behind the radio installation
• Dual colored LED
• Input power handling 50 Watts per channel
• Amp turn-on trigger (DC) 250mA
• 2 channel S/PDIF out (Fronts)
APPLICATIONS
Visit Axxessinterfaces.com for current application list
www.MetraOnline.com
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape
• Wire cutter
• Zip ties
• Multimeter
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this
product. Ensure that all installation connections,
especially the air bag indicator lights, are plugged in
before reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
• AXAMP-FD2 Amplifier Integration interface
• AXAMP-FD2 vehicle T-harness
• AXAMP-FD2 display T-harness
• Bass knob
Visit AxxessInterfaces.com for more
detailed information about the product and
up-to-date vehicle specific applications.
For Dash Disassembly Instructions, refer to
metraonline.com. Enter the year, make, and
model of the vehicle in the Vehicle Fit Guide
for Radio Install kits.
2
Adding a full-range amp and subwoofer to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system, whether amplified*
or non-amplified. (Refer to Page 3)
* For amplified models the amp must be bypassed/unplugged. Refer to www.MetraOnline.com for
the vehicle specific amplifier bypass harness.
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio*, then unplug all connectors.
2. Install the AXAMP-FD2 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3.
For NAV models only: Install the AXAMP-FD2 display T-harness to the vehicle and
make all necessary connections.
4. Plug the AXAMP-FD2 vehicle T-harness to the AXAMP-FD2 interface.
5. Plug the AXAMP-FD2 interface harness to the AXAMP-FD2 interface.
6 Connect the amp turn-on wire.
7.
The Bassknob is used to adjust the output of channels 5 & 6 of the AXAMP.
Adjustment is as follows:
Counterclockwise turn lowers the volume of channels 5 & 6.
Clockwise turn raises the volume of channels 5 & 6.
* For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
INSTALLATION OPTIONS INSTALLATION
3
REV. 1/30/25 INSTAXAMP-FD2
A
2-Pin
DO NOT connect 2 Pin
LD-BASSKNOB
20-Pin
LED
FRONT
REAR
SUB
2 PIN
20 PIN
CHIME VOL
UPDATE
PORT
Interface
R
LD-PAW-FD2
2-Pin
RCA Cables
(sold separately)
8-Pin
Blue/White - Amp Turn-On Wire
FL
FR
RR
RL
LD-PAW-EXT
1 of 2
LD-PAW-EXT
2 of 2
B
C
Factory Radio
*BACK*
22-Pin
22-Pin
Factory Radio Harness
LD-BASSKNOB
Factory Radio
*SCREEN*
54-Pin
54-Pin
Connect D to F,
disregard
E.
D
E
F
Connect A to B.
Disregard connecter C.
Voice Prompts (Navigation models)
*
Non-amplified
Chime volume
is not used in
this application.
A Toslink cable can
be used to provide 2
channel audio to an
amplifier/processor
**
Aux Ground output for accessories
LED
FRONT
REAR
SUB
2 PIN
20 PIN
TOSS
LINK
CHIME VOL
UPDATE
PORT
Interface
2-Pin
30
86
85
87
To 12v
Constant
If connecting multiple amps, Metra recommends incorporating
an SPDT Relay (not included). Metra SPDT Relay part #: E-123
SPDT Relay
**
TOSLINK
ADDING AMPLIFIER/AMPLIFIERS TO A FACTORY SYSTEM
Specyfikacje produktu
| Marka: | AXESS |
| Kategoria: | Nie skategoryzowane |
| Model: | AXAMP-FD2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z AXESS AXAMP-FD2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane AXESS
26 Lutego 2025
26 Lutego 2025
25 Lutego 2025
25 Lutego 2025
25 Lutego 2025
25 Lutego 2025
25 Lutego 2025
25 Lutego 2025
25 Lutego 2025
25 Lutego 2025
Instrukcje Nie skategoryzowane
- Nie skategoryzowane IHome
- Nie skategoryzowane Brentwood
- Nie skategoryzowane Yamazen
- Nie skategoryzowane XTRARM
- Nie skategoryzowane Kogan
- Nie skategoryzowane PAC
- Nie skategoryzowane Megableu
- Nie skategoryzowane Belanger
- Nie skategoryzowane Nofred
- Nie skategoryzowane Mercury
- Nie skategoryzowane Laica
- Nie skategoryzowane Nokia
- Nie skategoryzowane SereneLife
- Nie skategoryzowane Planet
- Nie skategoryzowane TK Audio
Najnowsze instrukcje dla Nie skategoryzowane
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025